StyroCHAT: StyroSEAL/LT by StyroMAX

StyroSEAL/LT by StyroMAX is four-part extrusion kit used to seal hatch doors or openings on recreational vehicles.

Comprised of Part A, B, C and an adhesive D seal, StyroSEAL/LT allows customers to create customised openings in their builds.

Part A & B of StyroSEAL/LT is our own 2-piece aluminium profile suitable for hatch doorways on RV’s which require a smaller looking profile. Powder coated white; the profile comes complete with ‘TRIM-LOK’ self-adhesive rubber seal.

Part C of StyroSEAL/LT is our own aluminium profile suitable for hatch doors on RV’s which require a smaller looking profile. Powder coated white; the profile comes complete with ‘TRIM-LOK’ self-adhesive rubber seal. This trim is only suitable for rebated hatch doors which is carried out on our cnc profile centre during panel trimming.

StyroSEAL/LT has a removable back leg to allow you to mitre cut the pieces and to fit the last piece in.

When you get your custom made panel set and you specify that you want StyroSEAL/LT, you will note that the panel is rebated to accommodate the seal.

If you have specified a lock, our CNC machine can pre-cut the lock for you.

Frequently asked question: Can I have my hatch doors flush to the floor? Yes you can by creating a "z" section with the seal.

It is very important to take care when you mitre the extrusion and the seal. Take your time and be precise. You can use a little bit of adhesive on the joins to ensure a good seal.

We recommend installing the D seal to the door, not the doorway. This will mean that the likelihood of damage will be reduced.

Subscribe now

For more information, check us out

StyroMAX is a leading manufacturer of composite fibreglass panel in Australia.
We are based out of Darra in South East Queensland.

StyroMAX produces a number of high-quality components direct to many established manufacturers Australia wide. Due to our high build standards and durable product we can offer a solution that fits with your warranty conditions and quality assurance standards.
Some of the services and products we offer manufacturers are:

• Faster construction time. (No complex timber or steel frames required)
• Reduced body weight. (Due to lightweight composite panelling)
• Impact resistant panelling. (Due to the use of FRP sheeting)
• High gloss FRP sheeting to both faces of panelling.
• Corner trims and service door trims.
• Internal panel conduits. (For cable routing)
• Repetitive manufacturing.
• Fast production turn-around. (Trade priority)
• CAD production drawings. (Via 3D solid modelling)
• CNC cut panels. (2 x 14.5mtr x 3.5mtr and 1 x 9mtr x 3.5mtr CNC profile cutting centres)
• Full back-up and support. (Accident repair gel coat always available)

StyroMAX offers a number of solutions for the Do It Yourself enthusiast.
Here’s some of the reasons why StyroMAX panels and products are great
for a DIY solution:

• Full flat pack panel set for your rolling chassis.
• Easy construction. (No complex timber or steel frames required)
• Reduced body weight. (Due to lightweight composite panelling)
• Impact resistant panelling. (Due to the use of FRP sheeting)
• High gloss FRP sheeting to both faces of panelling.
• Corner trims and service door trims available.
• Internal panel conduits. (For cable routing)
• Entry doors, service doors and windows available.
• 3D solid modelling of your sketches. (See your plans come to life before you construct)
• CNC cut panels. (2 x 14.5mtr x 3.5mtr and 1 x 9mtr x 3.5mtr CNC profile cutting centres)
• Teroson MS939 by Henkel. (Construction adhesive for your build)
• Full back-up and support. (Accident repair gel coat always available)

Subscribe now

For more information, check us out