96Ah headway PCB BusBars Heat Test

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

What benefits does this offer over just regular buss bars?

Sublife
Автор

in this configuration, the cells at position 3 and 9 are carrying higher current flow as compared to positions 5 and 7 - i would speculate that 9 (the one farthest from the charging terminals) has some cell variations in the nine cells it has to pull from - i would further speculate that 7 is just experiencing some proximity thermal bleed over - considering the load?- again jehu - few folks have the ability to dyno the theoretical high end like this lol - another insane demo man!

hmtechsvc
Автор

I have three questions. Do not misinterpret any ill will on my part in asking. But I am interested in understanding your pack. Question 1: You indicate (2:54) that each row is capable of supplying 50 Amps. You are using a figure of 8 Amps per cell so I'll use that number. Though the voltage of each cell in the row is summed in order to provide the desired output voltage (3.4V times 4 cells) of 13.6 volts, the output current supplied by this row of cells (4 cells in series) is still 8 Amps though at 13.6 volts. The amps are not summed unless the cells are in parallel--in parallel, the current would be increased by a factor of 4 (or 8A times 4 cells) in which case you'd have 32 Amps but the voltage would still be 3.4V. Question 2: Since the cheap cable used for providing current to the AC inverter was getting very hot and drawing excessive current, is it possible that this cable is preventing you from obtaining valid measurements? Question 3: What kind of BMS system do you have in place on this pack? I did not see it described in the video. Thank you.

rachmielbenberel
Автор

Official test? But I thought Glowe Voltage tested your cells! Just kidding... great video, and well warranted to clean the dirt thrown on your name.

Mr.NpK
Автор

Hola jeru, 1 pregunta ¿ se puede usar 2 bateria de 96am en parallelo?

josemiguelhooi
Автор

I wish I would have watched this video earlier. Could ha saved me some money.

hoga
Автор

How do you like the BattGo BG-8S Battery Meter??? Does it work ok as a balancer?

chijiokepenny
Автор

Will the headway 40152s 17ah cell fit your PC board???

chijiokepenny
Автор

Is there a good portable battery generator that works with solar power or is it all hoax.

robertm
Автор

Do u have pcb bars for spimo8hp 3.7v 16ah for sale

oa
Автор

This sort of thing tells me my ideas about using PCBs as (Ebike Battery) bus bars aren’t completely bogus.

Also, the need to a thermal camera is paramount.

Chief question - did he go for copper thicker than two or three ounces? I’d try to go for more, if possible.

dennisyoung
Автор

I guess it has thermal protection so to stop from cooking

shauljonah