Removing broken tip from Waterpik water flosser - DIY fix

..
Thanks for watching.

[janicerollins]

If you press the top triangle button above the on/off switch the blue nozzle will come out a lot easier when you grab it with whatever device you choose to use.

[andreap]

Omg there is truly a video on the internet about everything. I got mine out and saved myself $60 to buy a new one!

[missinfinite]

Thanks. This helped me see that my Waterpik wasn’t completely damaged. I just got my broken tip out by using a corkscrew

[noelle]

I was in a bit of a conundrum trying to figure out how to get the broken tip out of the base, thank you, so much for filming this!

[johnkingshares]

Thanks humans! Teamwork. I was unsure how to fix it without breaking something. Kudos to Janice and her tip also ❤

[BeeBeeimonotfact]

2023 still helping people get the broken piece out. Thank you

[andreadouglas]

2024, and this video is still helpful. It's very easy to drop the unit on the floor and break the tip!

[phyllisr.kwenda-mwadzingen]

You sir are a life saver! Thank you! Was super worried on how I was going to fix my flosser! 💕💕

[alanbweaver]

mine was broken at the very base - the tips below were VERY helpful...thanks, you saved me about $ on a replacement.

[robertsmithjr.]

Thanks a bunch for posting. Very helpful. Prevented me from buying a new one!

[ChristineCorey]

Wow there’s a YouTube video for everything! Thanks again you tubers !! Helped me fix so many things.

[phelpsod]

If you pop off the nozzle turning dial around the broken tip it comes right off. Mine was broken below the rim. Removing the head dial made it easy.

[gazingupwards]

Thank you. I was having hell even after watching this but I was persistent and by seeing it done on the video, I knew it could be done, 😆..and did it, yay!

[manueljr.]

Dude thanks for posting this because this was my exact situation lol

[jdstep]

Thank you! Thank you! Thank you! As simple as this might be, I really needed a visual. Then, too, I couldn't remember where the attachment head begin and ends. I have lost my other heads. I thought I needed to pull on that round spinning thing.

[mikeoler]

You can just push the release button above the on off buttons and pull it out. You can switch the tips for different pressure etc.

[RuneAnimations]

THIS IS THE EXACT MODEL I HAVE!! THANK YOUUU

[kenyag]

Very helpful 👍🏽 my Waterpik was fixed in less than 3 minutes with your video

[enrightnyc]

Thank you! It worked perfectly. I used vice grips and after a few maneuvers the tip was out of there

[afkwtflolmantwo]

Thanks, man! You saved me from a lot of stress