Introduction to photogrammetry and aerial mapping with DJI groundstation

This video shows how to use the F channel controller and photogrammetry tool included with DJI's groundstation software to build 3D models and aerial photos using a DJI drone. This works in much the same fashion with the full range of DJI drones from the Phantom 3 up to the S900 and S1000.

[SuperRemyd]

Interested in the second part of the process, getting the GPS data, tagging the photos and formatting the log for input into Agisoft or Pix4D.

[botitchyoupup]

Help, please. my s900 with z15-gh4 gimbal won't make pictures in autopilot mode. what gimbal setting should i do in A2 assistant for gimbal, to use f-channel? in a2 manual they say, that f1 channel is for landing gear...

[rssmogservices]

Hi, thank you for sharing this video.
i am using S900 with z15 and GH4 setup. i have 900mhz dji PC datalink but so far i do not know how to set camera trigger for photogrammetry tools. Can you share how you connect camera trigger in this setup. Thanks for your help.

[RandomPickles]

Where do you find such set laws for Canada? Every time I try to look it up I get a bunch of conflicting information.

[windparks]

with what camera is this drone equipped?

[pablowxyzable]

Please Colleagues need help as I program a flight path for my DJI phantom three pro?
I see the video but do not understand how my drone read, processed, or acquires the flight path.

It is for photogrammetry, I regret my English, I'm from Latin America and study geographic Engineering

[rinexco]

is this software compatible with Phantom 3 pro ?

[meornazrin]

is this app still available or has it changed to dji go?

[armchautsetse]

Help, please.I have set the photogrammetry tool parameters, however, the camera(Canon 5D Mark 3)didn't shot photos when my drone takes off and fly as the generated line .Why?Are there anything wrong with the trigger setting or other mistakes?what setting should i do in WKM MC to use f-channel? The original f1 channel is for landing gear.Really hope ur reply.
Thanks!

[GoProlet]

Thank you for this tutorial, good job :) am I right, the A2 can trigger "any" remote triggers, it doesnt have to be via the zenmuse? And have you had the time yet for the follow up process video? Very interested too in how you get the GPS data for every singel photo. Thanks again

[phoreal]

Would the sensor for the Phantom 3 advance be sufficient to meet a ~10-5cm accuracy?

[pietboek]

Is this the app for the pc or for the IPad?

[ghisaero]

Hello !
Thank you for your very interesting video!
Time 1: 36 s it says "Estimated number of photos: 61"
But after your mission how many photos have you done?
I have a problem, I always 4 times more pictures.
Example: Photos estimated 61 => 244 photos taken !!!
For your information we use the output F2 of our DJI A2. Exit A2 control an electronic card that controls the triggering of the camera Sony A7 RII.
Thank you for your help

Ghis

[topojian]

tengo un drone T1000, quiero ayuda, como grabar e importar los datos de GPS, para procesar en POSTFLIGTH 3D