How to Detail A Two way slab using AutoCAD. Slab Detailing according t0 British Standard

In video, i am try to show how you can properly Detail a slab which can then be sent for verification.

[shinyu]

Thank you so much! u explained everything/details very clearly. the best detailing video I found on youtube so far. Easy to understand and clear explanation.

[gabrielboahene]

Best detailing video I have seen on YouTube

[jeromeleal]

This is more like rebar cutting list. But in cutting list you need to add the development length of the bars. Thank you for your video, it helps me do cutting list for slab

[usmanyakubu]

Thank you Sir it's so educative. We need the Autocad file to learn from your work too.

[usmanyakubu]

Please checked your worked correctly the is one vertical bar is not detailed if i am not wrong. Thanks and hope my request will be giving due consideration.

[charlesiserhien]

You designed the slab close to the stairs as a 2way slab. It should be a 1 way, hence only one main reinforcement. Also why designing for bars at the extreme when its not a continuous slab.

[georgegooden]

music is LOUD and distracting. could hardly hear anything

[tshilombelirootsy]

when I check your drawing is wrong your grids are off-center from the columns and your columns and beams are not aligned correctly that why you failed to get 5700 and got 5697 you. the beam width and the column width must be the same so as they share the same effective length,
2 .when we do detailing we detail from the concrete cover in yours slab there is no concrete cover which is 30mm for 12mm bar.

3 Your bar calculation formulae is wrong it must be 5697-2(30)= 5637 divide by 250mm +1 spacing but for Y12 We use 200 C/C THEN 250 for Y16 as distribution bars. if you didn't add 1 it means what you have is spacing not Number of bars. your grid numbering must start from top to bottom a-c and right to left. that's the British standard.

[Mr.P]

Music is annoying...imagine yourself listening on a lecture with annoying music.