Tire Change Wisdom You've Never Seen Before -Never Struggle Again!

preview_player
Показать описание
A quick look at the key points required to change a dirt bike tire .

To watch the full length video for all the relivant details click the link below
Рекомендации по теме
Комментарии
Автор

Thank you so much brother I’m now a pro and can remove tube and tire in about 20-30 mins

abrahamorozco
Автор

Nut to the dust cap? Have I been doing it wrong all my life tightening it to the rim?

some_text_missing
Автор

Would same work for aluminum rim tubeless front? Specifically nc700x. Thinking about doing my own. Shinko 705.

desotopete
Автор

In my expierence putting the tube in before putting on the tire halfway on is wayy easier. Did both

Emiellivegamernl
Автор

This is fast and good buddy Awesome video

rolandkeith
Автор

To prevent wheel damage i cut both sidewalls all the way around with a utility knife. The tread portion falls off leaving the two sidewalls. Then i break each bead with tapered plastic construction shims you can get almost anywhere tapped in between the tire and wheel adding in shims until the beads break and each sidewall falls off. Use 6-8 tie wraps cinched up on the new tire as you squeeze the beads together with your hand and the tire will fall on the rim. I haven't done a tube but the cinched up beads should hold the tube in place perfect. You can squeeze the tire or move it slightly to take pressure off the tie wraps as you pull them out to prevent damaging the bead or tube. Basically you're eliminating the drop center and struggling with the beads by separating them during removal and cinching them together during install. It increases the bead circumference when squeezed together to about the same circumference as the rim.

johnedwards
Автор

Attempted my first tire change yesterday, it did NOT go like this

lowxpectations
Автор

I’m trying to change my tire and I pinched 5 tubes already and I’m so mad

VVSLEGENDARY
Автор

zip ties. Twice and fast. Way less likely to pinch a tube. I put my front on my klr with zero tools. slightly aired tube in tire. Ziptied closed and mounted it up using my hands and upper body. No spoons

bigdave
Автор

Watch the full length video for close up details of every step and never again struggle to change a dirt bike tire

TRyanLearnBikes
Автор

Im having a headache and panic attack trying to change tube of ebike tire, i talked to many cycle repair guys but no wants to do it, this chines ebike is worst ever ... product design sucke

unlimitedwealthmindset
Автор

Been there dun it move on to the next thing

-ts
Автор

B+failed to show the valve core reinstall 😂😂😂

nohandlehandle