Hot Wheels Real Riders Wheel Swap

What's up Boys!
In this video I show how I do a wheel swap using real riders. I've been getting a lot of comments on my videos of other You Tubers asking me where do I get the real riders from. I get real riders off pop culture, car culture and retro entertainment castings.

Here I do a wheel swap on a lifted Toyota Tundra yellow variation off the Hot Trucks 5 pack. Looks better now with real riders.

Remember first Safety!
Do not drill casing while holding it on your hand. Drill might slip away and you might hurt yourself! Set casting on a work table.
Be careful when using power tools!

Here are some tools I used:
Cordless drill
various size drill bits (mainly 9/64" and 1/8")
Small flat head screwdriver
thick wire cutters
small snaps
punch 1/8"
hammer (not shown)
metal flat plate (not shown)

Materials:
Brass rod (size is .032")

Additional information - I didn't show on video
(because I know you're going ask):
To screw my Hot Wheels back together I use the #50 drill bit and to do threads in the hole I use a 2-56 tap. The screws I use are 2-56 x 1/8" button head machine screws.

Hopefully you get a general idea of how to do a simple wheel swap using real riders on your favorite casting!

Let me know what you think in the comments below and hit that thumbs up if you liked the video.

See my other videos. Subscribe if you haven't already:

Saludos Amigos
Thanks for watching!

[ЯрославПетров-ын]

I’m your fan from Russia! In Russia nobody is engaged in tuning hot wheels. Your channel is best!

[hernanrestauracarrosmartin]

exelente gracias por la explicacion mil gracias amigo desde Argentina Bs AS

[catwheels]

This was very informative! I'm new to wheel swaps & you made it look easy & fun. Thanks

[jacobknapp]

Awesome, you should make a spare mount and put another tire on the back

[revsworldoffishing]

awesome vid budd so helpfull and awesome info

[EdsterIII]

THANK YOU!!!! This step by step tutorial was awesome. Now I know what drill bits I need. Sizes, etc. And the custom axels, never saw that done. I do a lot of paint work as well. So I want to customize the interior. "Leather" type interior. Now I know EXACTLY how to pop open the cars. I'm going to use a vice with rubber clamps to hold my cars in place. Thank you again. If I could give you 25 thumbs up👍I would. Great video. I'm going to start this weekend. So I hope I got this. I subscribed to you so I might request a question.. lol. Have a great night.

[vksoluciones]

Excelente trabajo mi hermano que se vea el poder latino y que mejor representante tu alla en el gabacho felicitaciones y muchos saludos desde Puebla Mex.

[raptordiecast]

BEST Wheels Swap Video ever I watched! :D

[rqmld]

me watching this video: play... pause.. write.. play.... pause.. write.. play... pause.. write.. play...
great video, as always
and thanks, dude
keep it up!

[cesarcorona]

Excelente canal yo customice la first edition del modelo de la Laffy Taffy que utilisaste y quedo perrota, admiro mucho tus videos, disculpame yo soy el que dijo una vez Ya me canse y es que en la peda al estar viendo tus videos bien tarde de alguna manera pense que era yo el que lo estaba haciendo porque tengo un chingo, espero me perdones por pesimo comentario tengo mas de 20 de collector, chingon tu canal, saludos de Colorado

[carlyanz]

that tundra looks awwsome with the realriders

[kennysdiecast]

nice vid.. as always informative.. it would be nice too see you a couple of vids on painting. first one showing how too prep for paint properly. then do one on the actual painting including proper primer color and clear combos. since there is enamel and lacquer paint.. them maybe one on how to clear coat or polishing.. thanks..

[carlosavila]

I need me some of them shelfs lol.. thanks for the video.

[lizardking]

Feliz dia De Las Jefitas!
Toda Madre Por Los videos👍

[dukelemans]

Thx for the informative video! I wanna do some off road customs and I'm still gathering info so I can learn how to do this stuff. Thx again! Great channel btw

[_gasser]

👍Rivera get video with a lot of info like always great to see u marking. Info veido s helps a lot your homie ivan bro

[joseluispinarocha]

No hablo ni entiendo mucho el ingles pero me gusta cuando hablas en español y te entiendo jajaja estan muy chidos tus videos

[rogersanderscustoms]

Sweet, brutha. I had to rob two Beatles Dairy Delivery Vans in order to get the same size. Also on those axles you can glue a glass bead on the ends.

[rolandoemme]

Primera vez que veo tus vídeos y la neta trabajas muy chingon

[cedicustomaniatic]

saludos rivera !
esas ruedas son realmente muy lindas para lograr un cambio significativo !!
un fuerte abrazo desde qro capital mexico