🛡️💪Testing out the Olsa Tools 🇺🇸 Flex Head Ratchet! 📹@autotechmike

🛡️HIGH TORQUE PERFORMANCE - Throw your breaker bar away: no more wasted time trying to reposition your breaker bar at just the right angle. Upgrade your workshop with this ratcheting breaker bar and save time thanks to its high-torque ratcheting mechanism. 👍 LIKE and SUBSCRIBE!

#olsatools #olsatoolsreview #autorepair #autorepairguys #autorepairtipsandtricks #autorepairvideos #diyautorepair #diycarproject #carproject #handtools #ratchets #ratchetsand #ratchetsandwrenchesegr #ratchetsandsockets101 #ratchetsandcoffee #wrench #wrenchtest

[delsolforlife]

It looks like the matco symbol on the back. Wonder if they sell to them. I know they don't make there own

[BillSikes.]

My flexHead is the most used tool in my entire toolkit, i love it

[joselozano]

I personally took a flex head ratchet & swapped a breaker bar handle on it. Not bad for building a 24in ratchet for $75.

[mckreations]

Olsa tools are pretty damn good. I started buying them a couple years ago with a screwdriver rack. I decided to buy other items after and have been very satisfied with each. They definitely aren't your typical low end junk. I got a feeling they contract with some of the bigger tool manufacturers and private lable the tools at a fraction of the big name guys that are very similar and likely made by the same manufacturers that make their tools such as Snap-on, MAC and such.

[wildhunt]

I just got their 1/2 inch braker bar not so long ago and I love it !!!

[DonkeyHammer]

The olsa is made by SK tools... Hope it works better than the SK Lp90 flex head. Everyone I bought jams up and needed warranty claim.

[boosted._sky]

Nice ratchet.. sorta SK vibes from the look...and sound...🎶

[Nonexistanthuman]

I see alot of stuff go into my warehouse but when I seen one of these wrenches pop up I had to double check it cause it looked like a quality product compared to what many are doing nowadays. Felt & looked well made too. When I start buying my toolset I will consider Olsatools trust me

[Jase]

Can you guys stamp the ratches MADE IN USA? Alot of guys would really love to see that... love your stuff, keep it up!

[Sin_Dinero]

Forget the ratchet, tell me about that light on your head, I’ve seen them on Amazon, but are they any I’m really wanting to get one, unless they are junk, can’t find legit reviews about them.

[JoseDiaz-bkmh]

Too small for the majority of my needs but it looks nice and I bet it would be pretty good for the average DIY guy or even an entry level tech just getting started

[reekz]

Sounds nice. Call me whatever you want but I only have snap on ratchets other than the 1 Craftsman 1/2in I never use. What I really wish I had was some S K ratchets. Those were a good brand. I had a 1/4in set back when.

[KekeeBlack]

Guys, after checking out the website, I have concluded that they are getting new upgraded stock in (120 tooth ratcheting wrenches!) so they have a bunch of stuff on sale now. I would wipe them out, but because of the big a$$ storm my paychecks aren’t going to go as far and my bills are going to probably double 😢

[jasonfeaster]

SK LP90 is the original to the olsa, and they're made in the same facility that makes Matco Ratchets. AJ Manufacturing

[deeeyewhy]

Does it have teeth on the flex that lock into a position like the gear wrench/husky or any locking flex head just without the lock? I don’t like ratchets that have this feature. I have locking flex heads and that feature is fine on them but on a flex head ratchet I want the head to have smooth articulation and not feel like it’s clicking in or out of a position when I’m using it. I don’t have a big tool collection I have about 11 different ratchets. A stubby 3/8 from orielys the 3/8” gimbal ratchet 3/8 and 1/2” locking flex heads, a 144 tooth half inch all by husky which are essentially gear wrench products, then a set of the craftsman gunmetal 120 tooth ratchets an extending 3/8” hart flex head from Wally World then the Pittsburgh pro wrestling 1/4” and 3/8” flex heads and those two have smooth flexible heads. They may be a little too floppy/ free flexing but i prefer that to the hart which has a ball bearing decent in the yoke that snaps the flex head in place although it doesn’t lock.

[cadillac]

Hey Mike - can you make a video on building a starter tool box on a budget?

[picoss]

Toss some gear oil in it they like thicker lubricant even a thin grease works but will get gummed up I get gasoline in mine so grease works

[snakattack]

Ive never used a flex head ratchet but i may get me one.

[james]

Dang on that link they got ratcheting wrenchs for $25 like a 12 piece set of SAE they want $30 for the metric but still a good deal

[heywoodjablome]

It all makes sense now Mike's not just showing us tools He's getting paid by the companies. When your heroes turn into villains I guess.