Amazingly CHEAP Voron 0.2! - SIBOOR V0.2 3D Printer Review

HOW CHEAP is this Voron V0.2 kit? And this V0.2 kit INCLUDES ABS Printed Parts to build a Voron? Is this budget Voron kit worth it? Is this Voron 0.2 kit any good? Let's build a Voron and find out!

Helpful Links:

-----------------------------------------------------------------------------------------------

Products Featured (Affiliate Links):

-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
-----------------------------------------------------------------------------------------------

Filmed with:
-----------------------------------------------------------------------------------------------

Timestamps:
0:00 - Intro
0:40 - Disclosure
1:06 - Unboxing
5:28 - Build a Voron!
6:26 - The Good!
7:48 - Hotend Testing
9:46 - My Perspective
10:19 - The BAD
15:10 - Conclusion
17:32 - Outro

The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.

#3dprinter #3dprinting #mandicreally

[ModBotArmy]

Watching this has me nervous about the printed parts. I haven’t seen any issues with the black parts yet but I still have a ways to go. Wondering if that particular batch of printed black parts had an issue or if it’s going to be the case for many others as well. Definitely seems like printed part qc needs to be better regardless.

[GregsMakerCorner]

Great video- and thanks for the shout out! I had very similar experiences with many of the issues you ran into. Overall I think it's a good budget kit option if folks go into it knowing the potential tradeoffs, and I think you did a nice job covering them. The parts seem to be a bigger issue for your kit- I only ran into two defective parts, and those were fairly easy reprints. I really do think Siboor should take a hard look at quality control of them.

[williampowell]

Just finished building my first printer (Trident 250). You're the first builder I've seen to use 123 blocks when squaring up the frame in a video. It removes much of the struggle IMO. Round spacer block kit was my other machine shop pull. Loved how tidy your wiring came out.
Big shoutout to the VORON Discord community for helping me get mine going! They were right there to help.

[Shaggywasntme]

Plan on getting myself a 2.4 kit here soon(ish) and so far your videos have been alot easier and informitive to watch. I really appreciate it and will keep on watching em! So stoked to build a printer from a kit for the first time! Much love

[Clough]

I smile every time I see one of your videos because you look so much like a rougher, grittier version of Matt Parker. For those of you who hadn't seen it before, I'm sorry. It can't be unseen. :)

[WhereNerdyisCool]

Glad I found this, they contacted me about purchasing - for review - their 2.4 kit. Since I am not a big channel, not much of any discounts. But I've heard from the various creators how problematic these kits are. I have an LDO kit at work and that's been amazing. Siboor offered the 0.2 kit for not much money and I think I will politely decline. Yes, even small channels can smell bad quality =)

[Founders]

Alan, I really appreciate this video as I’m still considering this kit. It was rather serendipitous that I mentioned this kit on your 0.1 review and less than a day later you follow up with your review. There’s really no excuse for the state of your printed parts. From the research I’ve done their documentation is lacking badly. I’ve heard they’re decent with customer service and sending out replacement parts, but they really do need to work on their QC. If I have to deal with a few dodgy parts I can certainly print them on a different machine but ideally everything should be good to go including all the hardware and linear rails. Thanks again and keep up the great work, cheers!

[dadsrcworkbench]

Great video as always. I am still eyeing that kit so thanks for showing the pros and cons.

[stevehanwright]

Really like your approach and way of explaining stuff well done.

[kenta]

I just picked up this kit a few weeks ago and to their credit, they've fixed the problems you've pointed out. Mind you, I ordered the kit without the ABS parts since I have a Bambu P1S to print them but otherwise, things have gone quite smoothly so far.

[lilhotdog]

I like your channel a lot! Hope you get the growth you deserve.

[AresROC]

Alan, great video and I wish I can build a voron as fast as you can! Looking forward to future videos, like what to do with all those printers we have build and how to advance 3D printer technology as hobbyist!! (Basically finding more excuses so we can buy/build more printers!)

[TheExtremeElementz]

Another great video! Thanks for making these.

[DJWhitelow]

Agree with you, even if I could re-print the parts on it the hassle of dismantling everything again to replace them makes it a no go for me. BTW love the colour scheme of your OG black/green 0.1, guessing you swapped filament mid print? Looks awesome👍

[Dirtybird]

As someone that's never printed but have always been curious I've just never had the free time after a life changing car accident I'm home bound and have been watching your reviews thinking about buying one. I absolutely love the fact you nit pick the hell out these machines. Thanks for your honest review and with that off to watch another.

[omranello]

I had exactly the same issues with parts I printed with a bad patch from Esun filament .. I didn't notice it until I made some changes to the x carriage, I notice a layer adhesion crack .

[KennethScharf]

SIBOOR offers a version of the kit without any ABS printed parts (also no main board). You could get that, and use the print it forward program to get the printed parts, or print them yourself. If I were to get this kit, I'd probably print the parts in PETG (since I CAN), and go for the BTT pico board (that was actually designed for this board) along with a RPi Zero (2) W. I'd have to install the klipper firmware myself, but there are many good tutorials on the web showing how to do that.
I've heard that PETG will work well with a Voron, especially if you don't intend to print in ABS. I mostly use PLA and PETG myself, both of these materials are much easier to print that ABS. PETG is reasonably strong, and almost as heat resistant as ABS.
BTW SIBOOR also offers CNC'ed metal parts.

[imst]

Those printed parts are exactly what I got out of esun abs+. Matte black color but the layer adhesion is horrid.

[alicec]

I kind of wonder if those black parts are printed in eSun ABS+ or something else analogous to it. Especially with batches in the last year or so, that stuff has notoriously poor layer adhesion, and that nice matte sheen is characteristic of ABS+

[italogarcia]

mine came with the black parts in good condition. one of the xy motors doesn't have the shaft aligned.. it didn't come with the connection diagram, so I connected the display wrongly and it doesn't work either. the rest is ok.