Fitting Ironman Bullbar | Ford Ranger PX III | DIY Install

In this video I install the Ironman Bullbar - BBCD066/BBT066-NL to my Ford Ranger PX MkIII 2020 model.

Following the installation guide supplied by Ironman the install to me about 5 hours with all the lights, indicators nd parking sensors.

#Ironman #Ford #Ranger #DIY #Bullbar #4wd #4x4 #adventure #camping #overlanding #arb

[FTX]

God idea cutting the bar lower then needed. Looks great. Did you order yours in the white and black paint or did you have it done yourself?

[cejulius]

Hi mate how are you....
I want to ask you how much is the vibration with the bullbar when you are in transit in gravel roads... And its behavior in corrugations...the vibration is too much???
I have an Ranger 3.2 XLS and I want to install a Ironman proguard bullbar (no loop)
Cheers mate

[boxxynz]

Any issues with clearance from the winch to bumper/grill? Got a dominator extreme im installing and its all veeeery tight

[MrSeqfisho]

Hi mate, loved the video and have watched it a dozen times before I have just fitted my own Ironman bar to our 2019 XLS. Yes the instructions leave quite a bit out and there was a couple of head scratching moments.
My big question is the indicator/park lamp wiring what colours went to what on the car as the instruction diagram is different colours than the bullbar wiring and I have no idea what colours to pick up on the car, any help would be much appreciated.
Oh and I left mine all black but was tempted to colour the bar after I saw yours, great work.

[chrisoliver]

Were there the chassis strengthening brackets behind that main winch moutn bracket? Then you had ti drill a 12.5mm hole through chassis?
I assume the main winch bracket and the small brackets that run along the sides of the chassis sandwhich the square front of chassis?

[alexpickard]

Great job, how hard was it connecting the fog lights and indicators? Is it plug and play or do you need to splice into existing wiring?