47 cc 2 stroke Mini Pocket Rocket Bike Rebuild Part 1 of 2 (Teardown)

Part 1 of 2 on rebuilding my 47cc mini pocket rocket bike, this video is teardown and inspection of what i need to order. hope to have the 2nd part made within the next month (or sooner i hope!) thanks for watching and stay tuned for part 2!!!

[andyjamestf]

Just finished re - building my son's one today, new rings slightly ported, race clutch, and a bigger mikuni carb! Thanks for the vid good bit if inspiration

[CraigArndt]

That didn't take long to tear that apart. That front sprocket was toast!

[Theanimalsquad]

This helped me take apart my engine for a partial rebuild thanks very helpful :)

[fnaguitarplayer]

that ain't bad at all. Guess they change day to day. i'll check back if ever need a motor, i still got a extra set of rings for this one if it starts loosing power. thanks, same to you!

[fnaguitarplayer]

wow thats a pretty good deal. they don't raised the price on these now, for a long time they cost 180 now there up to like 300!!! i traded for mine. thanks for watching!!!

[fnaguitarplayer]

you can use a screwdriver and hammer to get the flywheel off, take the bolt out, then pry up under it and hit the crankshaft with a hammer (not to to hard) then it should pop off after few hits, but don't pry up to much, you can crack / brake the flywheel

[kierankay]

i bought a mini moto crosser/dirt bike for £10 just needed carb reed valves manifold and pullstart also  cog on the gearbox waiting for the parts this thursday cant wait

[matthewmarrs]

mine will start but i have to keep my hand over the carb hole just a little and it will run but soon as you give it gas shuts right off i seals the head and the intake good and still the same thing.

[fnaguitarplayer]

just did, where they get you is the shipping costs, which is about the same as the motor!

[fnaguitarplayer]

ah. That happens all the time on these haha might want to check your fuel filter or replace it. thanks for watching!

[fnaguitarplayer]

Thanks! I didn't really change much, i had planned on new rings which i did buy but it didn't really need them, new clutch and clutch housing, new gaskets and that was it really! it was less than 50 dollars, i got most of the parts from various people on ebay, another good place is scooterparts4less, thats a good place to deal with. thanks for watching!!!

[fnaguitarplayer]

i probably should have just done that haha i kind of feel like i wasted my money on this rebuild, i don't really ride it that much. haha thanks for watching!!!

[XxpoisonxX]

Should've put a trx90x carbie on it they run good and faster and last really long

[fnaguitarplayer]

I used Duplicolor engine paint, its rated for 500 degrees F, which it has dulled down from the heat, you really need at least a 1200 degree paint, like grill paint for painting barbecue grills or exhaust paint for cars. Another advantage with using engine paint is that gas won't dissolve it. Thanks for Watching!

[fnaguitarplayer]

i know right. these things are easy to work on. seems like i'm always working on this bike, i done went through 3 clutches in 2 years haha thanks for watching!!!

[kevinramirez]

Great video! do you happen to have the list of all the parts you changed? and if you remember how much did it cost you in total to rebuild it?

[fnaguitarplayer]

Sounds like it may be in the carburetor or the reed valve, usually when one runs good (or at all) on choke, its in the carburetor. Might just need cleaned, i did do a video on cleaning these carburetors. Thanks for Watching!!!

[fnaguitarplayer]

I'll check into that! I don't ride it much, it goes about 30 MPH i'd say. Thanks for Watching!!!

[fnaguitarplayer]

haha heard that, Thanks for Watching!!!

[fnaguitarplayer]

i have a extra set for this bike, you can get them on ebay (where mine came from) for like 10 bucks. thanks for watching!