{825} How To Read EPROM / EEPROM Data

Показать описание

in this video {825} i demonstrated How To Read EPROM / EEPROM Data using eetools chipmax2 universal ic programmer and ic tester. it is universal programmer to program a large variety of programmable ICs and t test logic ICs. it is from eetools USA, ChipMax2 is a low cost & high performance universal device programmer, it have PC USB 2.0/3.0 interface. It programs a 64 Mbit flash memory in 42 just seconds. ChipMax2 supports over 13000 programmable devices with low voltage (1.8 V). ChipMax2 is the state-of-art universal programmer offers you the most advanced programming facilities with the most user friendly interface.
its software supports full WINDOW 95/98/2000/NT/XP/7/8 and greater. Auto search device select function supports E(E)PROMs & Microcontrollers. Device insertion test identifies improperly inserted device before programming. Check for incorrect device insertion, backward, incorrect position, and poor pin contact. High-speed device function tests and user creatable test library. Device Operations: Read, Blank check, Program, Verify, Checksum, Data compare, Security, Auto(blank check-program-verify), Option Bit program. Display programming parameters and optional bit information on the screen. Set device/buffer address ranges before programming devices. Extensive on-line F1 help system provides text and graphics. User-changeable programming parameters. Built-in editor for both buffer date and test vectors. Support Binary and all hex files (POF and JEDEC, Intel Hex, Motorola S Records, Tek hex , straight hex, hex-space, Extended Tek hex, and others; automatic file type recognition) with Load, Edit, and Save commands. Distribution of 16- and 32- bit data into 8-bit portions.
HARDWARE One on-board FPGA for extremely fast communication.
Supports real low-voltage support : 5, 3.3, 2.7 and 1.8 volt for programming power. Detects all pin locations for poor or damaged pin contacts. External START key allows production programming mode.
Internal universal power supply,110-240 VAC (no separate power supply required in foreign country). Current limiting protects hardware circuit from improperly inserted or defective chips and operation errors. Standard 48-pin ZIF(Zero Insertion Force) socket accepts both 300mil and 600 mil DIP devices. True universal pin driver hardware. Support a high-speed USB 2.0/3.0 port for PC interface. Hardware diagnostic program exams all socket-pin drivers before using programmer. Gang Program Mode allows programmers up to 8 units as concurrent programming system. (START ALL key enable to program the programmers simultaneously)

You are Invited to Join Haseeb Electronics

#universal #programmer #chipmax2
{825}, How To Read EPROM / EEPROM Data, how to read eprom, how to read eeprom, how to use universal programmer, chipmax2 programmer, chipmax2, write eeprom, how to read memory chip, eeprom, tutorial, read, eprom, programmer, how to, chip, eeprom programmer, write eeprom, haseeb electronics, eprom programmer, universal programmer, flash programmer, eeprom programming, read eeprom, data programmer, eeprom programming tutorial, read and write eeprom pic, eeprom read/write
00:00 how to use universal ic programmer chipmax2
01:17 how to use maxloader software to read eprom eeprom
02:26 how to read, save data from eprom eeprom