I Installed R600a Inverter Compressor In OLD Refrigerator!!

Are you tired of high electricity bills caused by your old refrigerator? Look no further! In this captivating video, we demonstrate a cost-effective solution to reduce your energy expenses. Join us as we install the revolutionary R600a inverter compressor in an old refrigerator, helping you save money while promoting eco-friendly practices. With the R600a inverter compressor, you'll witness a remarkable improvement in energy efficiency and cooling performance. Our step-by-step guide takes you through the entire process, making it accessible even for beginners. Discover how this simple upgrade can transform your appliance into an energy-saving powerhouse, reducing your carbon footprint and benefiting the environment. By optimizing the cooling cycles, the R600a inverter compressor ensures consistent temperature regulation, maximizing freshness and extending the lifespan of your food. The result? Lower energy consumption, reduced wear and tear on your refrigerator, and significant savings on your monthly electricity bill. Join our community of smart homeowners and learn how to retrofit your old refrigerator with the R600a inverter compressor. Say goodbye to excessive energy consumption and hello to a more sustainable lifestyle. Don't miss out on this opportunity to save money and contribute to a greener planet.
******************************************************************************
Products You Might Be Interested to Buy

Multimeters
Thermal Camera
Soldering Wires
Vacuum Pump
Mani Fold Gauge
Soldering stations

******************************************************************************

Social Links

#refrigerator #fridge #compressor #inverter #r600a #old

[Vinline]

I fixed the fan motor in my aunt's fridge today. Now youtube recommended me this video, my job looks like kid's job now after seeing what you did😂

[matt-g-]

Absolute illegal in Europe, to release coolant gas into atmosphere. The fine is up to 55000 $

[somaday]

Very clear annunciation, no distracting background music - this helped along with your clear step by step replacement process.

[DIYHelper]

Use a pressure regulator for the N2. In Romania these are delivered with 200 Bars. I would really not feed the circuit with this pressure. Regulating pressure by tapping on the valve is just insane. You are only regulating the flow, if the system is not open you can build up that pressure in the circuit....

[Thevolvo]

Satisfação por ter instalado um compressor fabricado no Brasil

[владимирглущенко-лм]

in 1993 I was 30 and I changed the motor-compressor to r-12 in 45 minutes ... and my knees did not hurt)))

[smvwees]

Last week my fridge totally gave up. I figured it would be the relais and compressor like in your vid. But since i didn't have all the equipment and knowledge you have, i figured to buy another fridge and let them take away the old one. In contrast to the fridge in your video, mine was pristine from the inside, no filth or stains or anything. I actually hope they refurbish my old one at the depot, since there is already enough waste. Also i am glad there still exist simple fridges that don't have bluetooth or other of those electronics inside. (Unfort. not with washing machines. I can't find a single washing machine anymore with a mechanical clockwork cylinder inside. All bleep bleep electronics now). Keep up the good job!

[wesrurede]

You are a perfect candidate for the carbon felt pad used to protect from welding and I'm sure brazing. You'll still need the regular wet cloth to cool. I was amazed it was able to protect whatever I put under it when Arc Welding.

[MichaelBeeny]

I'm amazed it's cost effective to replace the compressor and re gas with hours of labour on a very old freezer. I note the old gas was let into the atmosphere. That's not allowed in many countries.

[Homestead_Adjacent]

Checking for excess oil in the evaporator is a very in important step. Good he emphasized that

[tronixfix]

Yesterday i convert R600 fridge/ freezer to R134a. Had to change condenser, compressor and filter drier. Also shortened the capillary tube, now freezer compartment is at -25C and fridge compartment at 4C. Pressures when saturated are 5psi on low side and 120psi on high side.

[isettech]

Did you know that venting refrigerant to the atmosphere is a crime? It is required to be recovered per EPA 608.

[howardsimpson]

I had several old fridges that had rusted compressor pipes and all the R12 had gone years ago. The compressors still started and ran okay. I replaced the rusted bits with brazed copper pipe. I the pressurised the system with fuel grade LPG (propane butane mix). I then let all the gas out again and did this several times. As I refilled I watched the compressor current which did not get up to the rated current on the compressor label. Ice started to form on the suction side so I bled gas off until it stopped and then a bit more. After the fridge had come down to temperature, a little ice was forming again so I bled off a bit more. Two of those fridges are still okay ten years later, .No vacuum pump, no gauges, no oil change, no capillary change, no problems, lower power use, shorter running cycle just LPG highlighted on the label. Not illegal to bleed LPG to atmosphere. Most domestic gear chucked out can be home repaired.

[aleks]

we still have compressors from Zil Moscow refrigerators, produced in 1971. I installed it on the freezer and filled it with freon R134a. video can be watched on my channel, there is even with
English subtitles.

[JohnSmith-elmo]

So you just release the gas to the atmosphere. Good to see you care about environment. You deserve a medal.

[pauloeduardo]

Muito bom esse serviço. Pra fazer a nova carga de R600 poderia ter calculado 40% da quantidade original de R134. Isso é o que usam em média.
Abraços do Brazil.

[micropower]

If you are measuring the temperature, then go closer to the object.
Many sensors have a 30° opening, this means that the sensor-area is around 30cm if you have a distance of 30cm.
The laser there is only good to see were is the center-point of this circle.

Some sensors have a focal point of 1:12 (2.5cm point at 30cm distance) or some very good with 1:60.
Many people are doing it wrong, because they think that the laser itself is the measurement-device.

And the surface what you want to measure should be black. If I measure a aluminium surface of a heat-sink, then I paint the surface black with a permanent marker before the measuring. If the black area is only 1cm in diameter, then I use only a distance of 1cm.

[DandyDon]

I hope this variable speed compressor is better than the one LG manufactures, as they are still having problems with them failing.

[joeabad]

This dude know what he is going.. Appreciate your efforts in sharing us this video.

[ebozofred]

This my best work that I learne for three years in school please any looking for a job in this settle..