Getting Started in Mastercam Lathe | Webinar

Join our Certified Mastercam Expert Sherman Snyder as he covers how to get started with Mastercam Lathe.

This webinar recording features:

• Aligning your Models for Machining with ease
• Simple Steps to Define and Setup Your Stock
• Creating Your Own Tools
• Generating Complex Turning Toolpath in a few simple steps
• Checking your work before Machining

#Lathe #Mastercam

[timbell]

Best Mastercam training video I have seen yet...way better then Mastercam University

[jermainerace]

Another reason to prefer canned cycles is that it can make it much easier for a machinist to understand what the machine is supposed to be doing at any moment.

[michaelfrancis]

Thank you Sherman for taking the time to create such a thorough video of what it takes to create the CAM side of a lathe operation. Your efforts are very well organized as well as intuitive. I also like the fact that you took the time to show in, several instances, more than one way to "skin the cat". I have been programming for 25 years in G-code but for reasons I won't go into here, I find myself behind the times with this approach to metal working. I have been attempting to learn Mastercam on my own through videos such as yours and others ... (Titans of CNC comes to mind). My question to you is... do you think it will be enough to attempt to learn Mastercam this way or should I consider enrolling in a professional institution that is industry certified and would be what a potential employer is looking to see on a resume? I know this may sound like a silly question as MLC CAD Systems may very well be just such and institution but clearly I'm not familiar with MLC. I would encourage the opportunity to reach out to you in a way/forum that is a little more professional than just the "comments" section of a YouTube video and thanks again for such an outstanding tutorial!

[antoniorguez]

Hi, Well produce explanation off Lathe CAM OPS. Where could I download the step fil or solid fil to practice?

[jessecoleman]

Do something this detailed with boring and drilling with lathe only. No mill ops. That would be cool too

[mohamedabousalah]

Hello sir
What's you favorite CADCAM software ? Gibbs, Mastrcam, NX
Thanks

[md]

Hi Sir. Could you help me this alarm on mastercam lathe please please! " No areas of remaining stock found " after I created stock, Chuck for dynamic roughing grooving. Stock showed around model pretty good but didn't know why it pops up all time. Thank you

[jedimaroliveira]

hello, beautiful class congratulations! I would like to ask a question. how to make custom trapezoidal thread prlo 3d model. ? how to make the route? thanks

[matiaspablo]

Your video is very helpful! Have you come across something like when master cam would post G-codes but machine would do something else? I think this issue has to do with machine configurations. How would you fix the problem. Thanks in advance!

[karthikk]

Give Master cam Turning How to Use Usage

[DrDime_]

Not sure why you chose to do it with a model no one else has. That confused me. Still watched the video to learn, and I did learn, so thanks.

[BrandenEger-hh]

why do you set up the x axis perpendicular to the chuck face?

[vSUBv]

hi, is it possible to get the cad pawn for practice?

[igaming]

best video i have seen in my live THx so much n<3

[nickbryant]

Is there anyway to get the file for the Pawn? I am scheduled to take Mastercam training through you guys but wanted to get a head start

[ahmedjameel]

Sir i need Siemens 828d_2x_lathe post process file for Mastercam.can you provide me?

[kerenkilmanun]

Hello, explain what is meant by mastercam?

[kuei]

Whenever people create jaws they use "parameter" instead of "chain". Chain does not seem to work. Following the instructions for chain does not work.

[derick]

at 1200 and 15 inches a minute you'll break your 1/8" end mill