DIY Drill Charging Station / Cordless Tool Holder

Let's get the shop more organized with a drill charging station and cordless tool holder mounted with French cleats! #diy #chargingstation #toolholder

SHOP HERE:
________________________________
OTHER TOOLS:

Follow Us on:
Instagram: @PatriotDIY

Thanks For Watching! Please Like, Share, and Subscribe!

[TransplantHelper]

Very well done you do really good work. Thank you.

[jeanchance]

Very simple building charging station. The simpler the better! Recently subscribed to your site. You do very good work

[SuperWingman]

Great build. I drilled the angled battery charger mounting panel with a Forstner bit to feed charger cables through, hate cords! Also, I made my top stretcher / French cleat one in the same. But, my station is hanging on a sheet rocked wall. Hey! you didn't show the missed tool holder sidewall pieces, lol.

[idahoduckhunter]

Love your channel. I definitely ened a drill charging station and a french cleat wall.

[KenEDuke-yp]

Just finished building this. I did make a slight mod to the plans though. I just screwed the top shelf in with two screws on each side.. I made a slight bevel on the bottom back of the shelf. My Ryobi chargers have a very large plug on the end so I needed to be able to fit these through the small slot. I can remove the back screw on each side of the shelf and flip the back up pivoting on the front screws. This allows me to fit a very large plug through he opening. Once the plugs are routed to the back I can flip the shelf down and replace the screws. I figure this shelf will be plenty strong with the four screws in place.

[Eye_can_see_you]

Very nice build and walk through. I plan to use your process from my heat-gun and soldering tools. Cheers.

[ryantait]

Nice design/build. I'm not sure the super-glue activator helps much when you spray it on dry wood after your wood is joined as opposed to spraying it on the actual super-glue you want to activate and then joining the pieces.

[simonpetermurrell]

Great job! Why don't you do a video on your Kreg pocket hole holder you built there?

[russelllynch]

How long does it take to make this box

[trevorhardy]

Damn. I thought these plans would be free like most on YouTube