Changing wheel cylinder and bleeding brake on Dodge pickup

[dcrtse]

Thanks for helping the Hispanic guy, Mr. Gordon. We need more people like you in this world.

[markolsen]

much easier to bleed the brakes using a 3/16 clear tube on the nipple, run it into a bottle of brake fluid. This eliminates the yelling back and forth to pump and when to stop pumping the brake. Once the there are no more bubbles in the tube, just tighten the bleeder valve and you are done. You can even do this by yourself. Also make sure you have the drum installed when doing this otherwise you will extend the pistons in the cylinder all the way out and it will leak.

[vaskarthehunter]

Thank you mr Gordon for the informative video now I know what I need and what I need to do to fix my trucks break problem.

[rickhunter]

Much respect to you Mr Gordon for the great work you did there and for the awesome Spanish accent you have (old western+ Spanish)

[JoeHynes]

so happy I found another drip bleeder!! I've been watching since you had just over 1000 subscribers, looks like 10000 by years end

[msw]

Self-bleed to start with new cylinders, then pressure bleed. What I wanted to see and thanks a lot!

[alpha-bkod]

No sh...t ..mr gordon following your videos since long time and really appreciate all the info you put in our hands, thank you and god bless you

[loslobos]

Thank you Sir, I was able to replace my cylinder no problem after watching your video. 👍

[codycheney]

Hey Gordon, wow there was quite a bit of brake fluid all over the place ! You said you were going to do a brake job on a different time but, there isn't that much pad left on the shoe ! Good thing that the rear brakes are only barely used because the front brakes come on first ! Looks like it all went really great !

[cfubonecollector]

Your Spanish and the accent is pretty good, thank you for the video about to start working on my old W250.

[enriqueeo]

Good shit Mr Gordon thanks for this video!

[truegritbulldog]

Well done and helpful. Greatly appreciated.

[nathanarmstrong]

The pistons on the ends of the wheel cylinder; mine won’t go back in and one end looks like it is crooked. Any hel0 is appreciated.

[luiscontreras]

hey ... u díd a great job there Sir. but i was asking myself why didn't u Just change the rubbers inside the wheel cylinder instead of change the whole thing. i'm Just saying.

[Nuxalkman]

Going through the exact same thing right now.

[jayryan]

An instructional video should show all the steps! The wheel hub doesn't just slide off.

[pedroarroyo]

Drums brake is a pain i replace tha cylinder and the brake and give me a hart time

[smokeyj]

Me Gordon thanks for learning the language and hiring Hispanic workers

[re]

where did you learn to speak spanish like that Gorden?

[alexandernotchappleseed]

When you use oh riley's instead of autozone brake cleaner