How To Remove Fox Body Mustang Gauge Cluster (87-93)

______________________________________________________
In this video, Landan is going to walk you through the simple steps of removing a 1987-1993 Fox Body Mustang gauge cluster.
______________________________________________________

#LMR #50Resto #Foxbody
______________________________________________________
Due to factors beyond the control of LMR.com, we cannot guarantee against the improper use or unauthorized modifications of this information. LMR.com assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. LMR.com recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of LMR.com, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not LMR.com. ______________________________________________________

[roberttegeler]

What about the two screws up by the windshield??

[SteelHorseRider]

Mty car has 2 screws up by windshield not allowing it to come out

[stmichael]

My 93 must be diff...there are 2 screws on top that must be removed on mine also...

[chrispynov]

I was dreading removing mine until i saw this video, thanks 👍

[jeffflowers]

two screws on top at the windshield. do they have to come out?

[arturopruiz]

@LMR, you guy should make the lower dash panel for the 90-93 models !!!

[WFP]

Thanks guys for the video you make it pretty easy. Thank you

[yeayeasautoadventures]

do you have the insert nuts that go in the dash to hold the cluster? or a part number?

[mraume]

The 2 screws near the windshield that were omitted from this video can be removed with a 90-degree Phillips head screwdriver. If you have a bit you can tape into a hex socket to use with a ratchet, it'll go faster. My guess is the windshield wasn't in place when originally installed, but why Ford didn't pay a couple pennies more to make them hex head screws is beyond me.

[timsimons]

Can you show how to remove stock tach ?

[andrewacosta]

Is it possible to get a cluster for an 89’ convertible LX that has a speedometer that goes greater than 85?

[JasonFolkerts]

Anyone else having trouble with pulling the cluster from the dash as shown at 1:52? Mine will not pull forward enough to allow access to the speedo or wiring harness.

[sergiomendoza]

which cluster you recomend for my 87 fox? i need a new one but cant find the original one.

[chosenideahandle]

Cool. I guess you don’t cover anything for the Mustangs from the 60s or early 70s. Some guy named Ziad El-Halabi wrote an article on your site about the demise of the V6. The picture in the article of what is supposed to be an original V6 from the 60s is clearly an inline 6. Just letting you guys know.

[bestbrutus]

Shut up t web there doing all they can