How to use: 1 Channel DC12V Remote Control Switch with 2 button remote control

Newly made videos:

433Mhz Universal Wireless Remote Control Switch DC 12V 1CH relay Receiver Module and RF Transmitter 433 Mhz Remote Controls 1527 with 2 button

From:

About Working mode:

About Working mode:

1. Momentary/Jog: Press and hold -- on; Release -- Off

Keep pressing one button , the corresponding channel is working /on;
Loosen your finger is stop/OFF .
"4 channel switch"receiver" need 4 button remote control "transmitter "

2. Toggle/Self-Lock: Press -- on; Press again -- Off

Press one button for one time , the corresponding channel is working/on;
Press the same button again is stop/OFF .
"4 channel switch "receiver" need 4 button remote control "transmitter" ".

3. Latched/Inter-Lock: Press -- on; Press other button -- Off

Press one button for one time, the corresponding channel is working/on;
Press another button is stop/OFF"At the same time, another corresponding channel works" .
" 4 channel switch " receiver" need 4 buttons remote control "transmitter".

Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clear the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF".
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .

[qiachip]

This is our latest tutorial about this module, which introduces the principle, wiring and pairing of the module in more detail; if you have any questions, you can watch this video again;
I hope it can help you solve the problem! Let everyone understand the working principle of this module better

[kojelautakamera]

Thanks a lot! The user guide didn't tell how to erase the codes. Also the programming looks so much easier when I see it in video. The guide was not very clear because it was auto translated from Chinese. This was very clear video and had nothing unnecessary but pure facts.

[martincoutts]

Great video, the instructions supplied in the box are incomplete - your video is perfect. Thank you.

[attilasz.]

Köszönöm! :-) Végre be tudtam állítani self-locking módba!

[smartin]

This worked perfectly on a similar system! Thanks a bunch!

[Fekillix]

Great tutorial! Thanks. I use mine with two remotes in the latch mode. Works great!

[Enoch_The_Gent]

Why don't these video ever show the power source

[peted]

Thank you! The instruction for adding a second remote worked perfect.

[Gentex_Commander_]

If I use a 12 volt battery to power the relay, will it drain my battery when not in operation?

[momodu]

Super bien expliqué même sans parole !!! merci

[MrAutolife]

Thanks! I bought the card after watching the video!

[ilrichiamodellazolla]

I wanted to ask you for advice. I have connected a Normally Open electrometallic lock to this relay but I would like to add a led that lights up when the lock is not in action.

[Alyam_Trampool]

Есть ещё режим таймера,
1) это 4 нажатия кнопки на реле и настройка пульта на включение на 5 секунд.
2) 5 нажатий, на 10сек.и
3) 6 нажатий кнопки реле, на 15сек.
По истечении времени реле отключается автоматически.
К реле можно привязать до 50-ти пультов
Сбросить все пульты можно зажав кнопку на реле на 8 секунд до загорания индикатора на реле, или как в видео нажатием 8 раз на кнопку на реле. 🖐️😉

[janderTV]

Think u very much, i found you and the guide how to reset my module.

[keith]

GOOD job. your video helped me a lot because the receiver i purchased didnt come with very good instructions.

[leebo]

How much power can it handle? Car horn?

[zydrunasjocys]

Can i use this for 36v kids quad? Need this for safety, thanks

[avec-zam]

Hallo, i have a question.

Could i use this as a kill switch for my motorbike?

Lets say to cut the line from the plus of the battery to store the bike when shopping or something and put the second button to start the bike from distance?

I have a mecanical kill switch and at the other side a mecanical engin starter switch.

I would cut the wires and pass them true this device.

So that i could use the orignal swtiches when the remoute switch is on ON for the main power.

Thank you

[melplishka]

Sat Sri akaal my friend. I hope I spelled that right lol.

[twicv]

What is the wiring steps for this? Thank you