UPR Catch Cans are THE BEST you can buy.

Spoiler Alert: some catch cans are better than others… 😉 #UPRproducts #TheChoiceOfChampions

We have hundreds of hours testing our new Oil Separator to ensure the claims and results will exceed your expectations. No cheap looking, basic air compressor filters in the catch can here! The design of this unit is more along the lines of a True Engineer and cannot be compared or confused with units that have side by inlets and outlets with wool rolled up and shoved in them. The multi chamber technology in UPR catch cans captures and filters all the oil vapor and trash from getting into your air intake tract. That's the most important reason for a catch can in the first place!

[Fallguy]

UPR = 100% Quality. Metal nipples sealed into place with sealant (not just teflon tape), nipples already orientated to correct position, hoses already attached where possible, patented separation media with best recovery percentages, heavy duty brackets. Go for UPR no need to look elsewhere.

[perrymnazjurgens]

Today I installed the UPR Catch Can on my 2023 C8 Z51 Corvette (900 miles) - it took 10 minutes, wow, the quality of the Can, bracket, and hoses are of the highest quality. This is my 4th Corvette, even though I don't keep my Corvettes long, I will always know that I'm not destroying my engine, it's the principle behind owning a high performance sports car. Thanks UPR - what you say is what I received - THERE ISN'T AN EQUAL TO YOU!!!

[tonyviviano]

Just ordered the Universal can for my 2016 Kia Sportage with a brand new engine. Looking forward to putting it in!

[jrossnjax]

Recommend on 2.7 ecoboost? Only have 10, 000 miles on it

I definitely want to buy a UPR catch can, but I’m unsure which one to choose for my 6.4 HEMI NA engine. I’m considering these options:

- 5049-200-1: Has straight, short hoses with no bends, which should improve airflow. However, it mounts to a screw on the front of the engine (water pump). Do I need to unscrew the OEM screw, or does it mount on top of it? I’d prefer not to remove any factory bolts.

- Signature Series 5038-206-1: Likely has the same filter as the previous one. I’d consider this only if the 5049-200-1 requires loosening or removing engine components.

- Pro-Series 5028-210-1: Seems like the best option if its advanced filter improves airflow. Can you confirm? Also, I’m unsure about the long-term sealing of the Plug-N-Play connectors. Can they be removed and use the hoses without them for a better seal if needed?

Thank you for answers! You are the best!

[questallday]

Which would you recommend for a 2021 Nissan Titan SV???

[revfan]

Arent the best place for catch cans suppose to be outside of the engine bay so the vapor can condense better? I always see people installing them in the engine bay, i put mine in the fender well or behind the front bumper.

[samslade]

I bought one for my Ram. The instructions say connect PVC side to "IN" and the clean line to intake. HOWEVER!!!! There Is Nothing On It That Says In Or Out!!! I watched a dozen youtube videos and half had it one way and the other half had it backwards. Which Is

[Blazerghost]

I got a bobs catch can on my 12 gt500 and it’s a massive POS.