[393] Mul-T-Lock Classic Euro Profile Cylinder Picked and Gutted

[huxleypig]

A few interesting counter-points to this attack:

1) It only works on locks mounted the 'correct' way up; so no Euro cylinders or padlocks that are being held with the pin stack facing downwards, because gravity will cause the outer key pins to drop with the outer drivers, blocking the shear to both the outer and inner pin stacks.

2) Actually making a tool that resembles a 5-armed piece of wire, that will fit around the warding of a MTL and also have the ability to raise the inner pins this far is VERY difficult to make. It is not impossible I do not think...but very difficult.

3) While this attack has ostensibly been fixed in more recent MTL's, I have noticed that many KIK's actually have holes in the roof of the chamber caps. I do not know why they do this, and if there is even the tiniest of space (and there has to be approximately 1mm instantly available from the chamber cap thickness and the ridge above it that keeps it in place) then this attack could still be on the table for KIK's with chamber caps like this. Anybody know why KIK's chamber caps have these holes in them? Seems totally pointless and makes the fix for this attack potentially useless!

[eclipsedave]

This lock has been added to my brain list of favorites.

[PickME]

Very nicely done! I don't think I have ever seen and the old style pins before...very cool!! Thank you for sharing!

[Potti]

Very cool so see the history and enhancement of pins. Thanks for showing us this cool lock. Did I get this right. To exploit the flaw you must first use this overset tool and then you would pick the (5-pin) lock?

[georgebeorn]

L.P.Lawyer, If you expertise of the legal system is on par with your lock picking skills, your the one I'll call if I need a expert attorney.

[danielroglich]

Great job picking as usual brother, loved the history lesson on the mul-t-lock journey. Thanks for sharing it with us!

[hansvonmannschaft]

Don't miss out the 0:42 mark, Wyle E. Coyote explosives layout plan is shown on screen.

[POIONX]

That fly at 2:22 made me look twice, I thought it was a spider!

[gikqiul]

What is the best key lock in the system you would recommend for front door?

[sklyarman]

hi LPL, it looks like 6th inner and outer pins are of the same length, while looking on a key, is this not a compromise to security? does it make easier to pick, while you have inner and outer pins really close to each other in terms of their length, please? thanks

[Steel-Pinnings]

Very nice pick,
and explanation.
1 question though...
So the drivers that you see with the inner pin afixed to the outter pin are subseptable to the overset tactic??

[Ncap-NorthCentralArkansas]

sir I just purchased a goso dimple pick set and wanted to ask you want a good cheap starter dimple lock you would recommend

[hexoroid]

I dont understand those holes on the side of the key?

[reklaw]

When you get counter rotation, is that a spool pin?

[scheissenesser]

Also, mul-t’s can be picked with cheap mul-t key. Just hold and wiggle

[lmars]

VARY WELL EXPLAINED THANK YOU.Are you sure your not a surgeon lol Lock picking surgeon.you have some steady hands.nice multi lock how old did you say.THANKS again for sharing. 😎😎😎😎😎

[JBfromKY]

Need to find that fly so we can get a description of the LPL...

[markleng]

Nice pick! You are a DEMON with Mul-T-Locks!

[leonbentolila]

Hi, i have been trying to pick one of these multilock cilinder for a while, tried around 15 times, with no succes at all, can you give some advise on how to proceed for a successful picking? Thanks

[themadhatter]

Very interesting, thanks for the video 👍