the BeadSmith EZ-Rivet

The ideal tool for cold connections.
EZ-Rivet®
piercing & setting tool
• Pierces metal and sets semi-tubular rivets & eyelets
• Features 1/16" T-bar screws which can be switched out for a different size (3/32" kit sold separately)
• Use with metal sheet up to 18 gauge
• Deep recess for extended 7/8" (22mm) reach

BONUS: domed base for use with rings & other curved items, PLUS an allen key!

Instructions:

1) To punch a hole, place blank under piercing tip then rotate the T-bar clockwise until pierced through.

2) Insert rivet into each punched blank in desired order.

3) Turn tool over. Hold the stacked blanks and rivet with front side up; center the bottom of the rivet over the riveting tip then rotate T-bar to fasten.
TIP: Don't overtighten or rivet could split.