Tenlog TL-D3 Pro 3D Printer Assembly & Review

⭐⭐ I'm new to 3D printing but this was an easy start to it! I was looking for the dual filament capability and the rest is just a bonus.
Newbie to this game but with all the resources that are available on the web, me and my son are loving it. Finding all the playing around and experimenting lots of fun.....
#3dprinterforbeginners #3dprinting #3dprinter

Want free Amazon Delivery, video, music and more? Try AMAZON PRIME Click the link below:👉

Welcome to my YouTube channel dedicated to providing honest and insightful product reviews!

At Clough Reviews, I'm passionate about exploring and sharing our experiences with a wide range of products. Whether you're searching for the latest gadgets, household appliances, DIY products, or any other consumer goods, you've come to the right place. I strive to be your go-to source for informative and trustworthy reviews that help you make informed purchasing decisions.

📣 Please tell us, what do you think of this video?

===================================================

👉 Subscribe to our channel and press the bell 🔔 icon. Turn on notifications to never miss an upload! 🔔

===================================================

⏰ Video Duration: 00:18:07

===================================================

⌚ SCHEDULE:

⌚ New Videos Every Week ⌚

👉 Don't forget to share your opinion in the comments below.
Thank you for supporting the “ Clough Reviews ” YouTube channel.

===================================================

📲CONNECT WITH US ON SOCIAL MEDIA:

===================================================

📺 Watch my previous videos 📺

🎬 Installing a Basin Waste in 5 minutes:

🎬 BU-KO – 3 in 1 Multi-Tool Review:

🎬 The Grand Hyatt Rio de Janeiro Review:

🎬 HORL 2 Pro, Best and Easiest to Use Knife Sharpener, Ever!!:

🎬 Best MagSafe Case for Samsung S23 Ultra?:

🎬 Banyan Tree, Spa Pool Villa Luxury, Phuket, Thailand:

🎬 Zeavola Resort Review, Koh Phi Phi Island, Thailand:

🎬 Combination lock Key Safe with Removable Shackle:

🎬 SONY WH-1000XM5 Awful Name, Great ANC:

🎬 Sofitel Krabi Golf & Spa Resort Review:

🎬 Philips OneBlade Shaver Review:

🎬 Koh Samui, Thailand, InterContinental Luxury:

🎬 The Landmark Hotel Bangkok Quick Review:

🎬 Can Crusher Installation and Review:

🎬 Infrared Thermometer Non-contact Review:

🎬 Synology DS120j NAS. Removing and installing a My Home Cloud Hard Drive:

🎬 Galaxy Z Fold 3, Z Fold 4 Case with Tempered Glass Cover:

===================================================

❣ SPONSORED ❣
No, this video was not sponsored.

===================================================

📧 For Business Inquiries 📧

⚠️ "DISCLAIMER” ⚠️

[jarodsown]

I’ve had one of these for 2 weeks now and am finally starting to like it. It has taken several adjustments, mine was under extruding was the main problem, and many adjustments in Cura, but I’m now getting good reliable printing. The dual color still needs adjusting but the duplicate and mirror modes are great. I recommend getting a magnetic build plate, so much easier for getting prints to stick and getting prints off.

[INNOCUBED]

Thank you very much for your review. New IDEX with klipper will be released soon.

[JustinLCooper]

I've found that my glass build plates require more heat to get to a proper temperature for prints to stick properly. Sometimes an increase of 15-20 degrees C does the trick.

Cooldown takes longer and it is worth the wait as most prints just peel or pop right off without issue. I also use an Elmer's glue stick to apply a thin layer of adhesive on the glass for extra holding power.

I've considered switching back to a magnetic build surface to see if I can get higher print speeds due to the decreased weight.

[davidbutcher]

Put a whambam magnetic bed on it everything sticks ASA ABS ETC and heat is dissipated evenly.

[Chilternflyer]

I'm glad that your first 3d printing experience was a good one. I've been printing for 8 years now. I've just ordered one of these in the November sales. i can't wait to start designing parts on multiple colours and materials.

[mikeclinton]

Hello sir, thank you for the fantastic video you made there. I am about to buy the Tenlog TL-D3 printer but which slicer would you recommend to run it? Does "Cura" work? Thank you!

[CultureCrossbreed]

lol PVA filament? Have you TRIED THAT with this printer? It's AGGRAVATING! I could use some help here. Using Simplify 3D

[Frodovisio]

Thanks for that nice Video.
But I think you should turn around the spoolholders.
What looks a bit weird is the cable managment. Did you do any improvements on that right know?

[Domestic_Material_Engraving]

Good info. I had the same issue with the bed temp dropping and found the settings had eco mode selected by default. Turned it off and has been trouble free for almost a year now.

[maliksworld]

Can the print bed fit a mandalorian helmet?

[It-b-Blair]

This’ll be my first, just ordered it last night. Great gratitude for such a great build video! Best, most in depth one I’ve seen yet! 👍👍🙏

[wfatv]

Where did you get that sweet desk lamp?!

[TitoPopoy]

Hi. Do you know what type of guide rail slider is that?

[davidmaier]

Good review. I just got mine and I've had a few minor issues. The right hand Z Stop optic sensor wasn't making a good connection at the board (inside) so I had to take the base apart and reseat the plug. Then I think I had the same issue as you with the bed not being hot enough. But I had walked away from it and when I came back, the plastic mess had pulled the rubber boot off the E1 nozzle and mucked it all up. So that was a fun clean up. I'm gonna take my bed up to 80 and see if that helps my adhesion. Thanks!

[bobcatt]

Those VGA cables are a deal breaker for me. Thumbs up.

[gochiefs]

Thanks for the video. Just got one but I can't add a tenlog to cura. Any advice?

[CristhianGrados]

I have one question, how can I comunicate with you? Please, I'm gonna be so glad

[thebuttnakedpodcast]

Thank you for the review. I just purchased one and waiting for it to be delivered.