Easy DIY Crosscut Sled build (I THOUGHT)

This video, Easy DIY Crosscut Sled build (I THOUGHT). I thought this was going to be an easy DIY crosscut sled build. I was wrong. I screwed up at least 4 times on how I was building the sled. Once I figure out my mistakes the crosscut sled came out perfect. I hope you enjoy the video. This project was a lot fun and the only way to learn is by making mistakes and figuring them out. Make sure to like an subscribe to the channel. Please post comments and tell me what we can do differently on the next project. Thanks for watching.

Material list:
1/2 sheet of finished Birch plywood
1 1x4x6 Spruce wood

Please subscribe.

Be sure to comment as well. And don't forget to hit the thumbs up button as well.

Chapters
0:00 Intro
00:04 - Introduction of project
00:29 - Cutting the fence pieces
02:12 - Cutting the base for the sled #1
04:17 - Cutting the base of the sled #2
05:19 - Screw up on sled and fixing again
06:16 - Screw up the slider underneath the base
07:01 - Making a new base and this is the best design
08:31 - Using router with 3/4 bit for fence
09:50 - Installing the back fence and making test cuts
11:55 - 45 degree cut on the sled
12:36 - Wax and final look at crosscut sled
12:59 - Outro

Social media:

#diy #woodworking #crosscutsled #

[pattigreen]

I like the video. Now that I know what a crosscut sled cut sled is. Now I need to see you making a project with the sled so I can better understand how it works. I do like how it fits into the grooves of the table.