How to put on an N type connector

In this video we will show you have to assemble an N-type male connector.

If you like our videos, please subscribe to StellaDoradus Youtube channel!

[bluezoomer]

Well Done !!
AND... Finishing with a Cable Continuity Text is even a Better Thing to add to the video. Good Job !!

[danielayers]

The videos from Times Microwave say crimp only once. Do not crimp a second time further back from the connector.

[marirenegomez]

What’s the model number for the crimp tool?

[nathalyrobert]

no answer which crimping tool that is so useles video

[youyousag]

Crimping tool name please, and if there is a simple way to connect the golden pin without the tool

[tracoba]

What the name of crimper use to crimp n connector?

[Celliwic]

Not sure how Hz setting tests for continuity.

[lenny]

Need the crimp tool for the pin on the N connector....?

[George.JS.Bailey]

Bit difficult to perform this test if one end of the cable is at the top of the mast.

[DONALD-MAGA]

Times Microwave says crimp only once. Don't crimp a second time further back on the ferrule.

[shafiqurrehman]

May i ask part no. of this crimp tool plz??

[stevewithnell]

I don't understand... the RF travels on the inside surface of the foil, yet the connection with this connector, the connection is made on the outside of the foil. More confusing, the inside of the foil has a super thin insulated coating, so there would be no RF connection if you got the connector inside the foil. There is little point in buying high performance cable unless the connectors are fitted perfectly. So a bit lost really. To put this in perspective RG213, which is a conventional heavy copper braid and no foil, has a loss of 3dB at some length at 450MHz. An equivalent foil wrapped cable has about 2dB loss same length same frequency. We have 1dB in the savings budget. It would be easy to lose that if the foil connection is not correctly addressed in the terminations.

[Cybermonde]

Il manque le test court-circuit(shortcut) à la fin. Âme plus blindage

[MrToshiba]

I expected more "OnLy CrImP oNcE" fanboys to show up