Vinyl Fence Installation done the easy way!!!!

This video is for every weekend warrior out there thinking about doing a vinyl fence. Construct the fence before digging the post hole. After the fence is built circle a spot where the post should go. I predug most of the hole so you wouldn’t be bored to death. Dig the hole and install the 5x5 post in and add concrete and backfill. Thanks for viewing my video. Good luck. Feel free to leave some feedback. Thanks again.

[Techwithedwin]

I have watch many videos on making fence but this give me more confidence. Because you are doing it section by section which has has a low possibility of things going wrong and can take as much time you want to complete it.

[marcosc]

Wow so simple yet I never would have thought of this idea. Thanks so much. Very clever way of doing this

[Moondoggy]

That is a hell of a digging bar, that thing will give you permanent shoulder problems, they make much lighter version that do just as good.
Also a sharp shooter on a long handle works extremely good.

[frenchie]

No way!! Omg! This is all about working smarter not harder 👏👏

[giogonzalez]

quick tip bro, set your end post first and run both your lines after that setting posts and building it becoming so much easier trust bro, i usually do around 80-120 ft a day

[digitalcynicism]

Just did a 28 Panel fence of this exact system it looks like.

[jettsett]

The only thing that would do different is fill the hole with cement first. That way, cement is inside and out.

[mynamea.n.s.s]

I’m doing one tomorrow nice well done on the video thanks I was thinking I would do it like that I watch the instructional video made by the company I’m like fuck that I’m not doing that that looks hard you put both posts in and tried to squeeze it in his arms was big is my head and he found it hard to do

[IATCOTUOHAEW]

Seems a bit flimsy but it actually serves the purpose...

[eternallylit]

Do you count how many panels you use to make each section even? This is very a efficient way of building a vinyl gate, unless it’s unleveled

[freshgear]

How do you make sure it stays leveled as the concrete cure?

[thehound]

That’s a clever way to do it to ensure you’re on the money

[rachelelabbady]

Do these fences not require cement on the underground posts?

[mariadelva]

How deep do you have to dig and do you use concrete or foam?

[patrickjoosten]

I’m looking at building a vinyl fence with 0 experience. You moved it out of the way very easily, does it always do that? Or what locks it in? I will also have a 45 degree turn to make so I’m very interested in that maneuver

[reyhernandez]

I can see this fencing falling over in the future. You concrete it to make the post sturdy.

[fishingflawda]

🔥🔥🔥🔥🔥
How deep do you have to dig the post?

[jamesdamas]

Do u set your first post all the way then do that

[troyjohanson]

Do you just use redbags right around the pvc post or is there metal posts or wood inside the vinyl posts?

[alexramos]

This easy huh? I’ve been holding back on doing two pieces of panel on my property, this gives me motivation to do it. Do we need to use concrete or not necessary?