Makita XGT 40v GPH01 hammer drill with 1 x 18 inch auger on SPEED 2

Makita XGT 40v GPH01 Hammer drill with a 1 inch by 18 inch self feed Auger burying the auger in speed 2.

The 40V max XGT Brushless Cordless ½” Hammer Driver-Drill (GPH01Z, tool only) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry.

An electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop.

The GPH01Z is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. A reinforced gear housing and all-metal chuck provide additional durability.

XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

OUTSMART: Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh job site conditions
Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop
Up to 35% faster drilling speed with 2 speed settings (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM)
Compact length at only 7-1/8"; ideal for working in tight spaces
Ultra-smooth variable speed trigger provides optimum control
Reinforced gear housing engineered for maximum job site durability
All-metal chuck for increased job site durability
Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry
The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (batteries not included)
The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
The XGT Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
The XGT Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
Compatible with Makita 40V max XGT Lithium-Ion Batteries
Only use genuine Makita Batteries and Chargers
3-year limited warranty

@MakitaToolsUSA @MakitaCorporation

[stratixmedia]

I mean this is 90% having a sharp bit.

[christianness]

I used mine to crank over an old Allis Chalmers engine....it worked.

[tokyomaj]

😳Wow what a beast this 40v makita hammer drill

[herbsewell]

Well I just found out that Makita makes something bigger than 18v and then I go check it out and they're making 80v 🤯

[airzone]

Damn now I need to update my 18v stuff.

[cslloyd]

Hmmm I always try to stay out of hammer mode unless I’ve got a masonry bit chucked up. Maybe I’ve been doing it worng

[toddsmash]

Wow!!!

It does exactly what it's supposed to do!!! No way!!!

[kalbonication]

And I was focusing on the leaf blower in the back.... 😂

[_-KOEN-_]

I have that leafblower thats in the background. 👍🏻

[joel.]

The only problem is it's not Milwaukee!

[brendansierra]

why are you drilling into the grain like that I’ve never drilled a hole through the bottom or top of a 2X 3X 4X
Give that thing a real test drill it through engineered lumber

[frankjackson]

Dry lumber, sharp bit. This does not show how strong that drill is.

[wllrd]

Its a auger bit its doing most of the work

[thatquietkidty]

It’s going with grain so it’s easier, that and it looks like a brand new bit soo

[yodaddydaddy]

Now be back in 30 min after it charges again lol

[WTK]

“Wow that was fast” I hope she won’t say it 🐎

[squidsack]

I work with a guy who swears by the 40v but he doesnt own it and always uses my milwaukee

[garrettford]

This thing went through someone’s head and he still lived

[taylor]

People that setup these demos act like they have never used a power tool and it shows not a good look Makita

[mattl]

Didn’t a guy once fall ans got one of these stuck in his head