DIY Arrow Saw, Spinner Zinger 2.0 Build

Releasing a new product - 3D Printed adaptors for 20 series Aluminum extrusion - Arrow Saw and Spinner. For the average hunter who builds 1-2 sets of arrows a year.
I explain the arrow saw and spinner along with installing the new Zinger 2.0 fletches to my arrow build for this year.
#DIYBowhunting #archery #Zinger

I give 25% of income received through affiliates to Conservation, Community and Simply Helping Others!
To understand why or want more info see my personal Blog!

Who I choose to shoot with!

[austin]

This is an awesome rig with some ingenious components. Just ordered the saw and spinner kits from your site so I can stop procrastinating and finally cut some arrows for this season.

[madbearproductions]

Sweet saw. Dremel gets that high RPM for nice smooth cuts.

[izwanmohd]

are you selling the stl only for the part?

[TheTylerKline]

This arrow saw has a major design flaw. It only lets you cut 1” off the arrow at a time because the arrow hits the dremel bracket not letting the arrow get close enough to even touch the cut off wheel. You either have to make multiple 1 inch cuts until you get the arrow within 1” of your desired arrow length to get the arrow to fit in the guide. Or you have to freehand cut your arrows within 1 in of your desired length then put it in the guide to make your Final Cut. Meaning multiple cuts (at least 2)per arrow. The cut off wheel has to be bigger than the diameter of bracket so the arrow touches the blade before the bracket. I have not found a cut off wheel big enough yet to make this work. I wish I didn’t buy this arrow saw. Am I correct or am I missing something?

[bkg]

Looks like the link from your site is broken. I wanted to order the components to build my saw.