#XoneQuickTips - Xone:23C TP3 DVS Mod

#XoneQuickTips - In this week's Xone Quick Tip, Alex demonstrates how to perform the Xone:23C* mod in order to use its internal audio interface with Traktor Timecode vinyl.

*Please note: This job should be entrusted to an authorised service agent whilst the mixer is still under warranty as any damage due to incorrect procedure will not be covered.

[snooz]

why the need to be done by the user? wouln´t it be easier to be installed directly from A&E?? thank you

[romeisfallingagain]

WOW. YOU GUYS ARE SO AWESOME!!! thank you allen & heath. i was expecting to see "and now grab your soldering iron...." which would have been the point i gave up. top job guys. hope this becomes a standard feature across your products

[sjenkin]

why aren't these cables installed by default?

[djonanon]

BE AWARE the INSIDE screw to loosen the headphone jack is a torx T10! (NOT a torx T8 like the other screws in this video)

[alexg]

Alex could you please make a video how to increase the +6 dB for the phono preamp levels taking the resistors off and soldering. As mentioned in the manual. Please please please!

[mjdub]

Just did this today and love this mixer even more now! Thanks for making this video to make it easy.

[AB________]

Hello, does this step allows me to record sets as well using 2 SL1200?

[tiadowling]

Hi
When I play regular vinyl it sounds/feels like the mixer is being overloaded. I can barely turn the headphone volume up without it being too lound when cuing a track. I'm also unable to turn the gains up so the indicators hit the oranged before it's too loud. NB: I have the monitor volumes set to infinity mode already. I'm removing the DVS jumper leads to see if that makes a difference. Thanks

[CloudChillout]

Hi, I have a problem where the sound card is freezing as soon as it tries to play audio out of traktor. It can read the timecodes fine but will stop working when the playhead hits the waveform. The Traktor interface can still be used so I'm thinking it's a sound card issue. Any ideas?

[marcsunderland]

Hi Alex, thanks so much for this video.

I managed to get my Xone 23c mixer connected and have been really enjoying getting into using timecode vinyl! I have a couple of queries I hope you can help with?


1. There is a very quiet but very high pitched frequency present which goes quieter but does not go away completely when I turn the input levels down on my mixer Is there a way to get rid of this completely?

2. When I switch to Live input and choose to play normal vinyl record, the sound levels are all over the place and im having a hard time getting them to match. Any tips?


3. Any advice on how to record a set? When I had the first Traktor there was a record button which was really convenient. I was maybe going to use Audacity but am not too confident with getting the levels to sound right, I have tried and it has been a bit tinny.

Any help would be appreciated.


Cheers

[davidnyiri]

Hi,
On my Mac there's Monterey. I downloaded driver from site but I can't set the volume neither on Traktor neither on mixer. I use timecode vinyl.
If I put fader a bit higher the volume is suddenly goes really high (both of the master channels are on 0 - volume only can be set with fader and my speakers wanna blow up).

[АнтонАносов-яд]

Hi! I bought a new remote control, but when unpacking it turned out that there were no instructions and wires. How can I get them?

[robertmills]

Ffs 🤦‍♂️ I bought a A6 and had this mixer for years. I never knew what those wires were for. 🤣🤣 It works better than the A6

[domingogomez]

I was wondering is it possible to configure all inputs as line inputs? let's say a set up in which I route sound form Traktor but in addition, I want to use an iPad and a drum machine. Can you configure it that way? The manual say something about it but it is not specific describing it. Do you have any idea about it?

[santiagotimon]

Is it possible to control the input gain for the signal that comes from Traktor? I see that input gain 1 and 3 control the volume from the turntables, but the signal from Traktor is only affected by the faders. This is not very handy for actual mixing :|

[marcwirth]

Hi Alex,

I am desperately trying to enable the USB mixer to computer recording ability on my Xone 43c. It seems I have to so some modifications similar on my 43c than you did here ... any chance to see a tutorial about that ?

Cheers

[Wikikid]

Hi, how can I connect the mixer to my iPhone for live streaming in Instagram or FB? Will it work if I use the usb port connect straight to my phone?

[matth]

Hi ! is any type of timecode vinyl (ex : Serato, Native...) compatible with the software Cross LE Mixvibes (provided with the Xone 23C) to use DVS ?

[aaroncross]

Hey guys this helped me get inside the box to do the mod where you turn the phono level inputs to line level(as per the manual on pg 18) removing the resistors worked but the signals are definitely quieter than the built in line levels.. is this expected? Also whats the unused big rectangle plug? It has jtag/debug written on one side and “male” written on the other side of the socket. Thanks A&H love your gear!

[Mark]

Why not set it before it leaves the factory-_-