Anemometer BT100 Air flow MPH, CFM, HVAC | JoeteckTips

Join this channel to get access to perks:

Support

【Multifunction Pro Anemometer】Wind Speed, Wind Temperature, Wind Chill, Low battery indicator on bright backlit LCD screen. BT-100 is a portable wind speed guages can accurately measure air speed in 5 units: m/s, km/h, ft/min, knots, mph. Wind Temp in ℃/℉(Degree Celsius/Fahrenheit)
【Accurate Wind Meter】Wind Speed Meter for measuring wind speed range 0.67~67.1 mph(+/- 5% of readings), Wind temperature -10~45℃,14℉-113℉(+/-2℃,35.6℉); Resolution 0.1m/s; 0.2℃. 2 temp sensors and 8 vanes makes the meter is very sensitive to measure very low air flows to help you with HVAC installation, CFM calculation, Duct vents.
【Tripod Hole for Mounting】There’s a metal threaded hole on the bottom of the digital anemometer, so you can fix it on a tripod for continuous wind guages. To set your hands free when you fly drones, rc planes, wings, helicopters and quads, long distance shooting.
【Anemometer Case Included】It's a light weight, pocket size airspeed Meter, portable for you and your family to measure outside for outdoor activities, such as: shooting,Boat Sailing, Kite flying, Climbing, Drone driving etc.
【Easy to Use 】Manual / Auto Power OFF optional, Back Light Screen to let you see clear even in dark. 2x1.5V AAA batteries included to get you started when you receive the wind tester. Add to Cart, Buy it, Use it, for any quality problems, we’ll replace you.

MY GEAR

► OTHER COOL LINKS

GAMING RIG / Content Creation
AMD Ryzen 1950x Threadripper
Gigabyte Aorus X399 Gaming 7
Samsung M.2 960 EVO 250Gig
32gig TridentZ 3000Mhz DDR4 13-13-13-33
EVGA GTX980 Ti
MSI RX 580

[michaelpopov]

Looks like the trigger speed is very low, which is very nice. Unfortunately, my cheap 9€ pocket size anemometer have high trigger speed, more than 0, 8m/s. For HVAC is useless. Thank you for sharing this video, probably I will buy this anemometer also.

[kikomonster]

Good review.
I too was impressed with the how the blades seemed to spin without any friction. If you are going to use this for fan reviews, I suggest you standardize your methodology. With a bolt, attach the anemometer to the zero mark of ruler (meterstick or yardstick). Also, devise a way to elevate the anemometer such that the vanes are level with at the center of the fan blades. This will ensure the anemometer and fan are parallel to each other and provide consistent distance to compare the speeds. You can even determine airflow at different distances.
Thanks for making this video.

[lemidemissieboset]

Please tell me what a gap between anemometer and blowers, it have any standards?

[salchst]

Hey, can this thing also measure the speed of the hot air coming out of a politician's mouth?

[thcentlimited]

Was there a review in here somewhere? Not many facts about the device. How many batteries, type, standby mode, temperature reading?

[Hotwire_RCTrix]

The trouble with this device is it's totally inaccurate. No documented way of calibrating it. Junk.