First Wera Tool you Should Consider!

Disclaimer, all or some of the links in this description are affiliate links and we will earn a small commission if you use them.

[hayden]

Was my first Wera purchase. Sent me down an expensive path… lol

[iantoes]

I just got this kit today and made a small but very significant mod to it already.

I put a hole under the head of the ratchet so I can store it with the 1/4 inch adapter ready to go. To use a socket I don’t even need to open the main compartment.

This is how I went about it. With the ratchet in place I poked a hot straight pick tool down the middle of the ratchet hole. First just left a mark then checked for concentricity and adjusted before making a hole, then I proceeded to make the hole bigger with successively bigger drill bits but by heating the blunt end. I let it cool and removed some melted bits between each drill bit, ending in a 9mm hole that came out pretty neat.

The adapter lines up fair perfectly with the bit hole beneath it and I place the smallest Allen head bits in front of it. The main compartment closes properly and can be accessed without removing the ratchet. It basically looks factory, no one without the kit would even tell.

[daifeichu]

I've had this for a while now and love it. Great deal for all the things that are in it.
Side note. Make sure that plastic cover for the ratchet is slid all the way up and clicked into place. A couple times I didn't click it in and the ratchet fell out. Luckily I didn't lose it.

[robertp]

Finally, someone pronounced Wera correctly, well done!

[NemotheEngineer]

I'm a field service engineer and bought this on a whim, I installed a CNC machine and this set did around 70% of the work. Crazy versatile set and amazing quality, genuinely recommend it to anybody. Only negative for me, albeit a tiny one, is the locking mechanism for the swing out section. Over time it wears away and becomes completely loose. No big deal but worth mentioning. Cheers

[hardlyb]

I love those. The first (of too many) Wera purchases. I needed some hex+ bits for a gazebo I was assembling from a kit (I stripped out a couple of the heads on the pan-head machine screws in the first twenty or thirty I drove, and then I switched, and drove over 1000 screws in a row without problems). Then I got the imperial set, some Allen wrenches, more bits and screwdrivers, ..., and now I'm homeless, but with great tools.

[bulletproofpepper]

I work on remote locations and have weight limits on what I can bring with me. This little set goes with me even it I have to stuff it in my pocket. I had to replace the plastic rivet with mini connector bolts. The little driver holder plastic rivet just would hold up, I had a mini connector bolt everything size set and a spot of lock tight.

[jamesrosenberg]

Ive had the metric set for a few years and love it! the mini rachet is my favorite tool

[chrisharner]

I keep one handy as a service guy. I can slip it in my cargo pocket and crawl in some dark hole to repair equipment.

Swap out the 3/16 and 11/32 sockets for a 9/16 socket and a swivel. Much more usefull. When it gets wet and rusty don't spray the bits down with any petroleum product while in the case. It swells their plastic holders and makes them loose. I was lazy and did that.

A great little kit nonetheless. You could assemble something similar for a cheaper price but the holder is already well thought out and designed to slip in a pocket. That's where the value is at.

[chrisbest]

This has been in my everyday carry since i bought this! Been handy when i havent had my tool bag close to hand

[thisislargemouth]

Wera makes top quality stuff. Anything you get you'll be happy with.

[bruderbrot]

I’ve had this for a couple of years. The bit holder kept falling out and I lost it at some point. There is a 3d print on printables that locks the bit holder in place. Highly recommended.

[Grimsaviour]

That little bit driver is very very nice, I use It daily at work.

[bajothesparky]

One of the best mini ratchet on the market Point..

[ibrahimdeniz]

That set looks PERFECT
Just get a wrench setsmallyour ready for 90% of common tasks

[WillLeingang]

Truth! Matt Risinger introduced me to this tool, and I never looked back

[Weird_]

I don't have many wera tools but the ones I do have are my favorite

[jeffwolf]

I have several Wera tools mostly screwdrivers but I definitely want to get a set of probably both of the imperial and standard sets like this one

[jesselasalle]

I had a coworker that had this set. Looks really good. I may consider it, but often I probably wouldn't find myself needing it considering my current job now.

[JohnDoe-dfzz]

These are awesome little sets. The only complaint I ever hear anyone make about them is the price. But whenever I need some sort of driver for a quick fix, this is the first thing I pull out of the bag.