Extremely Rusty Pipe Threading Machine Restoration | Fully Jammed

Extremely Rusty Pipe Threading Machine Restoration | Fully Jammed
In this video I am restoring a very old pipe threading machine.I bought this pipe threading machine from a junk shop. This pipe threading machine is not able to work at all and is completely jammed.

I started the restoration work by removing loose rust and dust from the pipe threading machine. I then proceeded to disassemble all the pipe threading parts. Disassembling the pipe threading machine was very difficult because the machine was completely jammed. I did the electrolysis process to remove the rust from the pipe threading machine. After the electrolysis process, all parts of the machine were cleaned with a wire brush. And repaired the parts of the machine that were damaged. And some parts of the machine were cold bluing and painted on some parts.The handle of the pipe threading machine was not original so I took a new pipe and made a handle for it. After restoring all the parts of the machine, all the parts of the machine were assembled.
After that I tested the pipe threading machine and the pipe threading machine is working perfectly.

Work I do in the video and what I use . If you want to ask any question, please ask in the comment section. I read everyone's comments and try to answer.

Subscribe for more of my content. I'm uploading videos about Restoration.

Thanks for reading the description and thanks for watching

#pipethreadingtoolrestoration
#restoration
#restorationvideos
#tools
#toolrestoration
#vintage
#rescue
#asmr
#restore
#antique
#repair
#ayazrestoration

[РоландАзов]

Отличная работа!!!
Вот такой резборезный ручной станок, которым можно регулировать под диаметр трубы, вижу в первый раз. Я пользовался много раз ручным подобным инструментом, на которых под каждый размер трубы меняется насадка. Но такой инструмент не ожидал увидеть!!!
Браво 👍, хвалю за то что восстанавливает их хлама в полноценное состояние, такое не все понимают, поймут только те кто знают значимость таких
🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️
Браво маэстро!!! 👍👍👍👍👍👍👍👍👍👍👍

[georgebrown]

That is amazing how you restored the pipe threading machine to working order. It looks much better than before and it works like a charm too. Excellent work I must say.

[reuben]

Really enjoyed this restoration . Someone else's neglect gave you an expensive tool once you recovered it to pristine workmanship . Kudo's

[cesarrigobelo]

Muito bom...! Não conhecia essa ferramenta, ótimo trabalho...!

[jaguar]

Из куска коррозии...отличный инструмент 😎

[michaelfisher]

Very relaxing to watch and I really enjoy your craftmanship and skill. All the best.

[D.K.Lodbrok]

Again, more outstanding restorative work! Awesome!

[andrewclarkehomeimprovement]

Very impressive. The rubber hand grip was a nice addition.

[djalmabatista]

Abridor, de Rosca, ficou novo denovo 👍

[restoration-restore-repair]

I’m really impressed with the quality of your restoration work. The details you put into it are truly meticulous and exquisite.

[armandoarturorosabalsanche]

Well done my friend, from, Bayamo, Cuba

[thomaswillerton]

Been a while since seeing one one these, even longer using one. Well done.

[garymucher]

Obviously it took a heck of a lot of laborious time and effort to disassemble and clean all that rust off the tool. And equally so to paint an reassemble it again. But it looks and seems to work very well. Nice refurbishing pipe thread cutter. It looks like the treads are not the typical NPT. They looked pretty fine threaded unless it was merely camera angle. Thumbs Up!

[johnsonjohnson]

Amazing work! You've got my sub 😀

[Broxi-zbke]

You need to focus more on casting marks and sharp edges! Other than that, excellent work! 🤩

You will be making more solid material with fewer holes and cracks and a more complete look after welding, if you learn the settings of your welding machine! and shorter protrusion on the filling material. no offence, just a sincerly opinion on how you can make your fantastic works better, and with less grinding and compromises!

[maximussolini]

Wasted opportunity! You could use it, to make the thread for the hand crank, for the threading tool 8D

But seriously, I really liked how rusty it was 8) Like "rusty-rusty", not rusty 8) Great job!

[djalmabatista]

Parabéns 🎉seu de restauração é espetacular 🙏🎁❤️👍

[andrzejporeda]

Super jest odrestaurowane ta stara zabytkowa przedwojenna gwintownica do rur Pozdrawiam serdecznie. 👍👍👍👍👍

[ramiruhig]

great restoration I did Subscribe you are amazing

[silviavargas]

hola amigo yo tengo tres que son recuerdo de mi padre me encanta como lo restauras pero que liquido usas SALUDOS