CMX U - Universal milling center

preview_player
Показать описание
Highest performance and productivity with powerful milling technology for 5-sided machining
  1. DMG MORI
Рекомендации по теме
CMX U - 0:02:20

CMX U - Universal milling center

CMX U - 0:02:11

CMX U - basic universal milling machines

Facing Internal Features 0:00:10

Facing Internal Features - DMG Mori CMX 70 U

DMG MORI CMX 0:00:32

DMG MORI CMX 70 U - Bracket in SS2172 Steel

CMX 70 U 0:00:37

CMX 70 U with PH 150

New fixture i 0:00:13

New fixture i made for the cmx 70 u.

Slotting/Broaching a Keyway 0:00:13

Slotting/Broaching a Keyway on the CMX 70 U

DMG MORI CMX 0:02:28

DMG MORI CMX 70 U - G+S Werkzeugmaschinen

DMG MORI CMX70U 0:00:32

DMG MORI CMX70U DMG MORI CMX 70 U

H&V - EXPK1-M03-0114-12 0:00:59

H&V - EXPK1-M03-0114-12 - Initial Test on the CMX 70 U

CMX V - 0:02:16

CMX V - basic vertical milling machines

DMG MORI CMX 0:00:59

DMG MORI CMX 70 U (2017) Milling machine

WH Cell by 0:00:59

WH Cell by DMG MORI for CMX U & CMX V Series

DECKEL MAHO DMU 0:00:06

DECKEL MAHO DMU 70 V Universal Milling Machine

Introduction of CMX 0:01:45

Introduction of CMX 1100 V

ESPRIT ProfitMilling® on 0:04:46

ESPRIT ProfitMilling® on a DMG Mori CMX 1100V

DMG CMX 70 0:00:36

DMG CMX 70 U

Porting on the 0:00:38

Porting on the cmx 70 u

DMG MORI CMX 0:01:52

DMG MORI CMX 50 U (2018) - Universal Machining Centre

DMG MORI CMX 0:03:15

DMG MORI CMX 600 V cutting hard steel

DMG Mori CMX 0:03:57

DMG Mori CMX 50 U

CMX 1100 V 0:01:48

CMX 1100 V - Solution-based vertical milling machine made in Davis, CA!

CMX 70 U 0:04:46

CMX 70 U

DMG Mori CMX 0:00:25

DMG Mori CMX 50 U Machining center - 5 axis

Комментарии
Автор

It baffles me that the two machines have different Swivel capacities. I mean, why? Bad cable placement? It just can't reach the angle?

It just adds another layer of decisions to think of between deciding which one to get.

It should be as simple as just the work envelope, not a seemingly minor angle issue. Which can turn out to be a big deal depending on what the Post Processor is doing to interpret motion. If you bought the 70U, and decided later on that the 50U is all that's really needed, you pretty much can't, if the program happens to use that extra Swivel motion. Or also if you have a 50U but that missing motion of +110 down to +95 is also bad, which means you can't justify upgrading for some other parts that could use that angle.

Further more. -5Deg and -10Deg isn't that much to work with, in the first place. It's real handy with some programs I've seen to go up to -30Deg.

gredangeo