We put a 113hp Golf GTI engine in a T25 / T3!

preview_player
Показать описание

The engine swap took us from 69 horsepower to 113, which is pretty noticeable, but why did it take six months longer than expected?
-------------------------
--------------------------

Just Kampers are proud to be a recognised name in the classic VW car and classic and modern campervan community when it comes to the provision of parts, spares and accessories. Whether you’re looking for awnings, engine parts, heating systems or camping equipment – we have it all.

With a rich history dating back to 1989, Just Kampers have continually evolved to be the specialist VW parts provider you know and love. Not only do we supply VW campervan parts and accessories for VW T2s, T25/T3s, T4s & T5-T6s, today, we now also provide further specialist VW services, including camper insurance. Discover more about the Just Kampers story.
Рекомендации по теме
Комментарии
Автор

Nice start to resurrecting your Multivan. Just recently I swapped out my engine from the stock 2.1 liter petrol to a 2450 cc petrol. Went from the typical 90 hp to about 130 hp. Not a dramatic upgrade but very useable growth in capability. I sort of wish now I had a five speed transmission for it. We are all very fortunate that anyone gives a darn about these things, as they have a well deserved reputation for carrying a lot of stuff! Original owner of my 1987-1/2 van with about 306, 000 miles on it.

Edgy
Автор

in south africa they came from the factory with 2.1 and 2.6l 5 cylinder engines awesome power

jeremyoctober
Автор

We put a mk4 jetta motor in our 61 vw bus, lots of fabrication to make it work on a limited budget. Glad you kept it vw. I have a lot of luck with mk3 motors. 300k + on one and 250k on two others
Peace

johnnewcomb
Автор

I got a Ford V 6 Essex engine in my 88 panel van kombi, it was a common thing to do South Africa in the 70's, 80's and 90's as the original engine lack power, overheat in South Africa climate . Goes like a bomb up hills.

kenhewing
Автор

great content guys, loved this one, thanks for uploading!!

thechogri
Автор

Easiest conversion on the planet. I fitted one of those in 1995!

CS_
Автор

Wonder how I compares to a 2.1dj with 112hp? I miss mine! Stuck with a 78hp Dg at the moment.

fydstar
Автор

I would love to see an in-depth/normal speed version of the GTi engine rebuild/service as I want to do that for the GTi I have in my T25 🙂

xplanet_sim
Автор

Had this done to my old T25 (now sadly sold). Garage that did it tried to cut corners and not replace the fuel tank - big mistake - all sorts of trouble with the injection system - a new tank is an absolute must (along with new fuel lines) - but the end result is really worth it.

nnovxjq
Автор

Nice work... It would be great to know a parts list of all the bits needed to make the conversion... Plus a rough cost?
Finally it would also be good to learn more about what electrical adaptations were needed in the conversion too.
Thanks 👍🏻

camperdan
Автор

1.9tdi 115hp would have done the job just as good. And a PB 150hp would have done it even better. 😁

LaGantoise
Автор

Low Torque and high revving. But anything is better than the 1.6 diesel.

DoubleOSeven
Автор

VW did put a 1.9 litre and 2.1 flat 4 petrol engines in the T25 from factory but didn't produce the same horsepower as the Golf GTI engine you put in yours.

Lawrence-uihv
Автор

Brilliant video, what's the mpg now? I assume it's improved :)

vicwyatt
Автор

Thanks for your channel I'm from South Africa & VW van fanatic. My question is, is it possible to put a Golf 5 or 6 engine in that van?

SandileMkholwa
Автор

Omg! That's my DREAM machine! And it pulls! Approx how much would an engine refit like this cost? Many variables, I know.

JackAcid
Автор

well in south Africa I have seen some with 2.0 to 2.5 l petrol from the factory

giftpheko
Автор

Which air filter did you use? Is it using the original air intake at the sides?

bryanmatare
Автор

Will the gti engine have any advantages to the 2.0 aba 1.8 head swap I did to mine? Worth the swap?

gkor
Автор

I was wondering how were you going to fit an in-line 4 cylinder engine in an engine bay designed for a flat-4.

josephheston