Upgrading My Mini Mill Adding A DRO

preview_player
Показать описание
Igage dro install and other upgrades.

Igauge DRO

Mill vise

LED light
  1. gixerman01
  2. Igage
  3. dro
  4. Mill
  5. upgrade
  6. mill restoration
Рекомендации по теме
Upgrading My Mini 0:06:31

Upgrading My Mini Mill Adding A DRO

Upgrading The Sieg 0:10:24

Upgrading The Sieg X2D Mini Mill - Air Spring Install Guide

The Ultimate Mini 0:19:43

The Ultimate Mini Mill - The Best Upgrades I Made To It

Upgrades for my 0:10:50

Upgrades for my Harbor Freight mini mill

Mini Mill Quill 0:20:40

Mini Mill Quill DRO Budget Upgrade Mod

I Bought A 0:08:03

I Bought A Minimill to see if they are Worth It

How I installed 0:10:14

How I installed my DRO on a mini mill and other tid bits of info

UPGRADE YOUR MINI-MILL 0:09:27

UPGRADE YOUR MINI-MILL | ULTIMATE Mill Cabinet / Base

Mini Mill upgrade 0:02:57

Mini Mill upgrade with DRO

Mini Mill Unboxing, 0:28:46

Mini Mill Unboxing, Setup and Upgrades Video #51

7 Easy Milling 0:10:58

7 Easy Milling Machine Improvements and Mods

Mini Mill Upgrade 0:03:06

Mini Mill Upgrade - Reverse Function

Mini Mill: Replacement/upgrade 0:19:15

Mini Mill: Replacement/upgrade of the drive and hand controls, plus adding a tachometer

Harbor Freight Mini 0:36:25

Harbor Freight Mini Mill brushless motor upgrade

Part 1 Harbor 0:06:48

Part 1 Harbor Freight Mini Mill X2 CNC Conversion Step by Step

Small Milling Machine 0:25:54

Small Milling Machine Improvements - PM-728VT

A small improvement 0:07:51

A small improvement for the mini mill

Well... I BROKE 0:06:50

Well... I BROKE My Mini Mill... Little Machine Shop Belt Drive Installation

Grizzly Mini Mill-Servo 0:19:53

Grizzly Mini Mill-Servo Motor upgrade install (see description) / Part 1

The Cheap Chinese 0:21:36

The Cheap Chinese Mini Mill

I Put A 0:16:17

I Put A 3HP Motor On My Mini Mill

Mini Mill (HF 0:10:15

Mini Mill (HF 44991) Upgrade - Large Handles

Mini Mill Upgrade 0:04:10

Mini Mill Upgrade - Spindle Tachometer

Mini Mill upgrade. 0:00:16

Mini Mill upgrade. Dro and more

Комментарии
Автор

Very well executed. Hope to see more upgrades from your channel. I happen to have the same Mill. Greetings from New Delhi, India

Birender
Автор

I know this is older video but I did like the DRO readout mounting and so I used the two brackets that make it very stable when pushing buttons. Thanks for the idea.

gvet
Автор

Very nice addition, thanks for the video

dannylivshitz
Автор

That was smart to offset the x axis assembly to clear the gussets!

dwightcarlson
Автор

Saw the lip off the casting on the backside of vise. I use same vise on mine

rogerstubbings
Автор

Great video. What mill would you recommend for a hobby work shop

burnsm
Автор

I see this is an old video, but I just ran across it.
Clean triple readout set up you made. Nice.
8 months later, are the DRO's still working well?
What are your thoughts on your Grizzly ? Would you buy it again?
I need a small mill too, to make parts for a machine I'm building.
I'm thinking Grizzly, or Precision Mathews. Both have the X, Y, Z travel I need.
Thank you

keithlane
Автор

OK, it's been two days, have you ordered one for your lathe? Haha just ordered a set earlier for my Grizzly 0704. I almost ordered two sets but will see how the first one goes.

Beater
Автор

Is there a Half feature on that system? Thanks.

johnstrange