ANSYS Fluent Tutorial | Swirling | Swirl Flow | Multiphase Flow | Swirl Flow ANSYS Fluent | ANSYS 20

In this video, it's shown, how could you model a swirl flow problem simulation in ANSYS. For this simulation, a cylindrical pipe geometry has been selected. This swirling simulation is carried out without any UDF. Hope you would like this video. Please hit the like button 👍, comment. Subscribe to our channel.
#ansys #swirling #swirl #ansysfluent

Visit our Channel Page for More tutorial Videos.

[mugajoph]

Thank you for the clear explanation in all your videos. I want to ask for a video on droplet deformation and breakup in a channel constriction. Thank you.

[manojkumar-cmym]

you are doing impressive work in providing such videos. Please make a video on the bubble column reactor computational fluid dynamics where the liquid is initially half filled.

[AnastasiiaSemenko-yk]

Thank You for this tutorial! Maybe You can help understand me, how to simulate a melt flow for centrifugal casting. I do not fund any tutorial on solving this task.

[adrianabarbosa]

Amazing videos and lessons, thank you!
For hydrocyclone: water and solid particle flows (diameter of 0.6mm and volume fraction of 0.0013), which Fluent models would you recommend working in the simulation?

[rishikulshrestha]

Thank you so much ❤

Can you provide a simulation for tyre hydroplaning ( a loaded tyre rolling on wet surface ( 5mm water film thickness))

[LiaqatH]

Great job. Please make a video on analysis of heat transfer in jet impingement

[ammarlaichi]

Can we simulate laminar mixed convection in 2D and what do we set it, axisymmetric flow or swirl axisymmetric ?

[تحشيشعراقي-عه]

Hi
How can a simulation of flow in open channels be done with a regulator? The question is: How are materials defined and boundary conditions made? Thank you

[saurabhchhipa]

what is differnce between swirl flow of fluid inside a rotating pipe and fluid inside a cylinder which is rotating about its axis.

[roshangramsci]

Can't change the inlet velocity higher than 0.001 m/s
After changing the velocity, flow through the pipe is not continuous. Pressure at the outlet becomes -ve.

[srinivas]

awesome sir . Sir please put a video on heat transfer analysis on earth tube heat exchanger

[jasonpd]

wow I'm so impressed! Could you do an ejector tuto please ?

[muhammadnabil]

how do i achieve a swirling plate simulation on ansys? the parameters are orbital radius of 5mm, angular velocity of 150 revolutions per minute (rpm) and height of the plate is 2mm. i am trying to achieve what was shown in the video but applied to a swirling plate instead of a pipe. thanks!

[Unknown-kpgh]

Please, could you do a tutorial about evaporation-condensation in heat pipe (with or without udf). Good luck

[jayantachanda]

Sir in every video please try to make chart also for different variables

[zohaibrehman]

I have some questions ia there any forum we can talk?

[zohaibrehman]

Can we do the same for polymers in an extruder

[asisharanjanpradhan]

can i give swirl motion to the inlet section without rotating the wall of the cylinder ? if yes, how ? can you suggest ?

[sundarapandim]

PLZ POST VIDEO ABOUT "SWIRL FLOW IN SUBSONIC NOZZLE"

[gaziabbasbhurani]

Hello sir
I change different mesh size, results are change why?