Converting a Wired Alarm Into Wireless

In this video, Michael from Alarm Grid explains how you can convert a wired alarm system into a wireless alarm system by using a wired to wireless converter. This will allow you to take the existing hardwired sensors from your old system and continue using them with your new wireless system. This can save you money by not having to buy new wireless sensors, which can very quickly add up in cost if you are using a large number of sensors with your system. Setting up a wired to wireless converter is actually quite easy, and it a fairly simple task for anyone replacing a wired alarm panel.

The easiest way to set up a wired to wireless converter when swapping a wired system for a wireless one is to install the module in the location of the old panel. This is typically in a storage area, such as a garage, attic, or closet. You should start by powering down the system and disconnecting all of the existing hardwired sensors. Then remove the wired panel, and connect the wired sensors to the new wired to wireless converter. In many cases, you can use the existing resistors for the sensors, thanks to a feature called EOLR learning that is supported by many converter modules.

Most wired to wireless converters will need to be calibrated once everything has been appropriately wired. You will often need to enroll the module itself with the system so that it can begin transmitting signals to the wireless panel. You can then begin learning each sensor into an individual wireless zones on the system. Remember that you must choose a wired to wireless converter module that transmits signals at a wireless frequency that is compatible with your new wireless system. Determine which converter module is compatible with your system, and make the appropriate purchase.

[twistwist]

Sometimes the home developer (in new homes, if you choose to have it pre-installed by certain alarm company) requires the use of wired sensors because some of those sensors can be hidden in the windows and doors, including sliding doors… you don’t see them. So technically, and what I’m trying to say is wired sensors are not just OLD tech like you mention in the video, it has other purposes/motive as well.

[charlescutsinger]

Trying to follow this guy is impossible 😊😂

[kosmo]

Great video. I have a question on Alula RE508X translator that Brinks installed to monitor our home. So far this system is useless to us because of the constant false alarms, particularly on a zone that has two sensors wired in series. Brinks refuse to come to resolve the issue. All they want to do is selling us wireless sensors to replace the wired ones, which we didn’t want the first place. Since then I’ve replaced those 2 wired sensors and the false alarms seem to be more frequent, especially in night. My question is can I push the configure button on the translator to calibrate the sensors without affecting the wireless monitor setup? I don’t want to have to deal with Brinks again. Is there a solution to this false alarm issue? Thanks

[Smithsarus]

Any info on upgrading a FAP SK5208 to a wireless satellite call out instead of a phone connection.

[clintmillent]

Any tutorial on how to connect sixc2wa converters for command panels?

[joao-joao]

Just remember that wireless can be remotely jammed, and if the signal goes to some remote location using wireless, it can be radio jammed.

[Pw]

Great info, but after watching this video, I feel like I've drank a LOT of coffee. [Almost shaking!]

[stephaniehron]

What converter do you recommend for a Bosch system?

[Z-Ack]

I just want my gemini to notify me via text msg through my wifi because i cant pay a monthly fee for monitoring.. its got a wireless doohicky on it but got no interface or signal i can detect from it.. dunno..

[yeungwilliam]

What’s the transmission range between the 5800C2W and panel ?
Do I need the 5881 receiver to accept the signal ?

[stephaniehron]

I have a old Bosch D6412. 16 years old. Can this be converted ?

[sherryjellison]

An ADT Tech came and "upgraded" our wired system because ADT said it was mandatory. Now my wired window and door sensors do not work. What type of converter do I need to ask for in order to further use my wired sensors?

[JoeTurnbullAngler]

Why wired? They can block your alarm. Stick with WIRED!

[thosharmon]

Please. I beg you. Edit out the "um"..."um"..."um".