cmm alignment movie

Lesson on plane, plane, plane alignments using a Hexagon Global Classic CMM

[inzalsports]

I couldn't got strength answer from anybody but you. You can't believe how many people are not using CAD model but creating program manually. I owe you one Sir.

[seun]

Good demonstration. I used to work for a company that use Mitutoyo Crysta Apex 7106 (2015), Metrology. PCDMIS is a 2012 CMM, Manual Measurement. Mitutoyo Crysta APEX 7106 is an Auto Measurement, AND Manual. The Smallest Probe They Had Is .010, ten thous of an inch. Auto Meas, means somebody has to write a program.

[charlescham]

i like your video, i wish this vid was uploaded earlier when i first started learning PCDMIS.

but i still like watching it.

[skidoo]

For manual alignments, I use one point. Then let the machine find the part in DCC. When checking more than one part, it lets the machine find each one each time. Also for alignments, older versions of PC-DMIS are sticklers for order of precedence. Level, rotate, then origin. It’s good idea to continue this practice. Also, when you use the “auto-align” button, the recall alignment goes back to “startup.”

[sergiomartins]

Hi Mister @Leslie Sinnock. The company who i work, have a Hexagon CMM Machine and i'm a biginner working with the Machine. Can you make a video to explain how to make a alignment with CAD=Part

[masters]

Great video! Dumb question for you... I'm wondering why I don't see the trihedron symbol you're mentioning @13.52

[geoffparmenter]

Always best to do your manual alignment directly off or the same as the DCC datum structure alignment. Using other features will always have or add more deviation. So do both alignments off the same exact features. Always.

[scottdowney]

This is painful. I just went through this training. It's not easy. You guys need to make this users friendly.

[uguraydemir]

Hocam merhaba size bir sorum olacak yardımcı olursanaız sevinirim,
Teknik resimde 5 ayrı datum var A, B, C, D, E ben şimdi CMM de 3-2-1 yani aligment nasıl yapacağım?
Datum A dan düzlem, B den çizgi, C den nokta veya çap mı yada bu 5 datum dan istediklerimi kullanabllirmiyim

[bobkessener]

Plane-plane-plane alignment is not necessarily linked into GDT datums on controlling document. Why not align to key features vs what is convenient. Castings will be very different for part alignment to CMM.

[ชาญยุทธธานีพูน]

Sir., Please advise for offset alignment thank you

[haitachha]

Can PC-DMIS best fit group ponit with one Datum is curver surface or spline? thanks

[katieemerson]

Does anyone know of a video for step (offset) datum alignment particularly for a casting point alignment where -B- has two casting points to align to but are offset from each other?

[pabloarmendarizortega]

Also you can do all in automatic making a transformation

[clayworley]

if you applied a clearance plane on your part it would not try and go thru the part. Just set your clearance plane to .250 or .500 prior to the DCC and it will never crash.

[philipwolfe]

I'm new to pc-dmis. What am I doing wrong when my program says to pic 1 of 3 points, I then go to the machine and the probe will not beep. I will let me smash the probe if I keep going. I've watched your video 50 times, I am doing everything the way you say to. I know its something simple but I have nobody to ask. Thanks

[JimmyGFromDayton]

Hello, I'm trying to use a READPOINT to locate my part and then have the DCC take over and do a 6 point per Plane pickup for making sure all Planes are good. A well known "teaching" company has a video on READPOINT's on YouTube, but they don't execute the code with an alignment and frankly the video is almost useless to me without showing the process the whole way through. You seem to have a firm grasp on this software, can you do a video showing this?

I know it is a lot to ask, but it would be greatly appreciated.

[shashikumar-cvoc]

dear sir,
how to take base alignment readings print ?

[inzalsports]

After watching video I was so positive that I can use cad for my free state part program but I guess it's not that easy.

My cad models are in car position. Any thoughts how to use that Cad model?

[laxmankale]

Dear sir please make video on CMM CAD off line programming PC Dmis and please share