🔧Galaxy TAB S Glass Only Replacement - FULL GUIDE

My equipment:

Join my page👍

Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜

[TheTitanssx]

Thanks Jerry ! I was looking for a very long time since this tutorial !!

[parakotopezzz]

Думал это невозможно, наконец то хорошее подробное видео! Мастер!

[simoncloutier]

I succeeded to save my tablet with that video but it's a hard job. Pay attention to the way you spread the glue cause you may create bubbles. You don't want that. Thank you Jerry mobile

[robertoreali]

Jerry thanks! Why did you remove every part before putting the screen under the uv lamp? It's so necessary?

[akulahwoihan]

Thanks bro...i really appreciate this tutorial.. success

[norxcontacts]

Thanks for showing us this, I decided to sell it and buy a new one. I would probably break it.

[REVIEW_JUJUR]

u open the back case wrong... first step is 1:55 the plastic back will follow the gold frame.

[davetarrant]

great video what type of heat gaun are you using on the screen please

[ua]

Just to check a couple of things;
1. Does the glue cover the front camera & proximity sensor points on the glass?
2. How do you stop the glue from getting on the lower buttons? - or does it not matter?
Thanks

[johndecarvalhorealestatese]

how much glue do you recommend to use?? 5ml? 15ml 50ml. when actually placing it on the LCD before the glass goes on top???

[ivanborruel]

Hi, I have a Galaxy tab 3, I tried to replace the digitizer but it has glue in the middle of the lcd screen and digitizer. I cleaned up the all the glue and lefted with out glue, now the tablet responds slow, with Lag, do I need to add loca glue or the tabled is broken?

[michaelthieren]

what kind of glue do you use, have you got an internet site where I can Buy it ? .
What is the size of the metal wire that you use to separate the glass and the digitizer ?
Do you heat the glass after you glue it ? Can we use an other type of glue or an other type of heating ?

[joseesquivias]

I separated mine didn't cracked it or anything all of a sudden I put it back together and know my motherboard overheats when I use it bought another motherboard to see if that was the issue and it turns out that the cause of my tablet overheating is the lcd that I just fixed I down load a game called dead trigger and the screen goes crazy and that's without loca glue I'm going to use loca glue and see if the problem goes away.

[michaelpaulmanzano]

is this applicable also to Tab A series, like Tab A7 Lite?

[Moumoulynx]

super esque you can tell me what is the kind of glue tube? that you use to glue the glass

[parakotopezzz]

Привет! Сделал свой 8, 4". Дольше всего времени заняла очистка дисплея от геля. Хотел спросить: Ты говорил будет видео с Т800 (10, 5"). Оно не получилось? Есть ли отличия в стекле под Т805 и Т807 ??? Там какой-то контроллер кнопок видимо находится, и снять его нереально без повреждений, насколько я понял. Я прав? Спасибо за твои видео!

[fabriziolai]

Hello Jerry Mobile I followed your guide for the device of a friend I think the real "problem" for the glass change is the glue. In the tablet that I made there was a really high layer, which I was able to completely remove only after 3 hours of cleaning with a spray called E21

[JoelArdenAlexander]

Was that screen burn, or did glue get in the LCD on the bottom right? (The pink light area seen after repair)

[fionawalsh]

Hi jerry . did you ever replace glass only on a galaxy tab A 7.0 ?

[shevserg]

Привет! Скажи что за клей? есть такой же, но без инфракрасного света сохнул