Eastwood Dual Voltage Must Have Upgrade!

In this video you will learn how to do a simple $12 upgrade to your Eastwood Dual Voltage powder coat system that will make it spray much more evenly then out of the box. If this is your primary system for your business or hobby you will definitely want to consider this fast and easy upgrade!

Royal Coats Powder Coating located in Spring, Tx.

281-985-1442 call/text

Want me to powder coat your parts? Reach out and we can make arrangements!

I started this channel to show my process and help others. When I started coating there was limited content accessible for powder coating so feel free to reach out to me with any questions concerning powder coat or equipment.

[hardcore]

I would like to see a comparison on the different guns, and what bigger money gets you….

[RightNowPowderCoating]

Props for playing with that gun. Got me thinking that with my 3d printer I could make a decent tip for that dang eastwood gun.

[Playgun]

Yes I would like to see the comparison between the guns. Great video, thanks!

[calevel]

I did same muzzle upgrade and also machined a brass diffuser/emitter tip about 5/8” diameter and my Eastwood gun works pretty good. Next I will build a small booth. Thanks for your videos, they helped in the process.

[LucidAutowerks]

Great info, just subscribed. I’d love to see your oven and spray booth setup. I’m building my first oven right now to step up from a toaster oven and I’m always looking for ideas. It’s only going to be 2’ x 2’ x 3’ for now until I can find room to build something bigger.

Edit: never mind. I just clicked on your videos and saw that you have a video for the booth. Going to check it out now.

[Brightviewpowdercoating]

So question I'm doing a large blasting cabinet and large oven that are home made, I'm making them out of 275gal fuel tanks. The oven is going to be gas because it's 100% heat and heats faster. Now, do u see a problem with using gas ovens, and is there more money made in larger items. Just a quick pro con if u could. Thanks for the channel it's came in very helpful.

[adrianmaree]

Another great, practical video! Would love to see the comparison between the three guns results. I hope there's enough interest. Keep up the good work 🤛

[ThePadutch]

Isn't there supposed to be a ground wire hooked up to that wheel somewhere?

[ngaudio]

Did you ever end up making a follow up video to this where you cure the wheel or a different wheel using this mod?

[brianschlosser]

What size tip did you purchase and use?

[mikecondoluci]

great video that works good, what psi do use, i just powder coated some brackets i made for my side x side for lights i had problem with powder sticking im gonna give that a try

[zackarymorrow]

I just purchased the dual voltage Eastwood gun, I noticed you kept clicking the button with your thumb, does that help with the powder sticking into little corners or what?

[kristianirvine]

Some really good advice .great job keep up the good work

[hawaiibikekahuna]

Can I cut the wire going to the Eastwood gun and put an automotive plug on it so I don't have to drage the whole kit with the gun?

[peteredwards]

Just made the mod 👍 I noticed in the vid that you were pressing the button with your thumb on and off rather than just on all the time, why is that ?

[joshchilders]

Love the channel man! You may have mentioned, but I couldn’t find it, which size tip did you use? 16mm 20mm 24mm or 32mm?

[ttoy]

where do you purchase your powder from??

[hardcore]

I would like to see a comparison on the different guns, and what bigger money gets you….