How To Tension EW10A Engine Timing Belt in Peugeot Vehicles

preview_player
Показать описание
*You can donate for my favorite drinks (Guinness Stout & Red Bull) or as an appreciation of information life perspective I share.

*Ikenna351 speaks from Nigeria.
Рекомендации по теме
Комментарии
Автор

You have to lock the crankshaft as well because the bottom pulley is "floating", there is a hole at the back of the engine towards the flywheel. The hole in the engine is 30mm, but the hole in the flywheel is only about 9.3mm, so you have to turn a shaft down. The 30mm part should be max 25mm long, and the 9.3mm should be about 15mm long.

krisholt
Автор

Hi is it normal for the tensioner pin to move back after tightening and turning the crank?

longclaw
Автор

how did you assume timing with the crank not being pinned? and why the pliers/vice grips on the intake cam when its pinned and cant move anyway

canoaslan
Автор

Would you please give me the part number of the cooling temperature sensor for this engine ew10a rfj 2000 cc

alexanders
Автор

Have u ever had a cracked flex plate on the auto version with the al4 gearbox, I have a ticking sound at idle and wondering if it's the flex plate that's cracked?

TheCheesenChips
Автор

A year ago I had problem after replacement of timing belt engine EW10J4 after engine running car doesn't start and i find lost compression at cylinder 1&2 what your opinion thank you so much Sir,

lono
Автор

guys, please help me with this engine
i miss a sensor upper from thermostat housing and i dont know how its called
it have 2 holes and a connection

dariusfelik
Автор

How fast is that engine EWE10a? And is it easy to maintain? Does it move very fast more than EW10 or EW12?

adewoleoluwaseun
Автор

Mecânico desse não precisa nem de inimigo

if
Автор

Dude find you a new job, you can't put the belt easily, drop off your tolls etc....

Filatov