SUB FRAME BUSHING NISSAN VERSA / CUBE how to replace subframe bushings

On Amazon:

Quick overview on how to replace a worn sub frame bushing on this 2007 Nissan Versa in your back yard.

Give it thumbs up if the video helps you out and consider subscribing! Thanks for watching!

KzGuy2 (aka NoNonsenseKnowHow) `

~~~~~Help Support the Channel Below~~~~~

*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Other AWESOME Channels You Should Check Out:

[davidgiles]

You’re my kind of mechanic. Excellent video and I love your ingenuity.

[davidmorrisjones]

Good explanation - and more important than anything, you showed what worked AND what did NOT work. Great job.

[humbleyourego]

Ive found that if you are looking for a decent temporary/permanent fix without having to remove the subframe, you can modify a few radial arm bushings from a 2005 Ford e350 as they share similar sizes. All you would have to do is cut the bushing to size, grind some material off and insert it without removing the old bushing. Using polyurethane caulking to help it stay in place.

[dalesmith]

Nice Video. I liked the way you showed the challenges and how you dealt with them.

[Peppermint]

Nice video. For everyone, be sure to use QUALITY brands, you don't want to do the same job 6 months later saving a few $$ on a chinese part

[dilshardnisthar]

This video helps a lot, i have ordered parts but they will take 3-4 days. Do you think its too dangerous to drive without fixing it

[knights]

Buddy of mine has a Nissan Rogue. Asked me to help him find the loud metal on metal clunking in the front-end. Turns out it was the front sub-frame bushing (just behind the lower rad support). Not familiar with nissans but when I did a search on the part it was obvious that this must be a very common problem for these vehicles. Except for pure greed I cannot explain why the car manufacturers cannot address and fix problems like this quicker (ie. like Subaru boxer engines and chevy minivans and their headgasket issues which went for years and years before implementing a simple solution which could have saved thousands of owners needless grief and expense).

[viktorjones]

Same problem with my 09 Tiida.... Thank you so much Sir !! the video was very helpful

[greggo]

Direct and to the point Excellent Video!!

[TheFailroad]

Super helpful, seen enough to know to send it to my local shop

[fredox]

Super vidéo! Parfait pour se préparer et faire le travail correctement sans surprise.

[KAJBS]

Nice. You just made my life much easier. Gotta go do it on a 2007 versa

[stevengarcia]

Hi im from Puerto Rico i have a Nissan versa hatchback 2009 and im having the same problem. In the video you mention the front bushing and the rear bushing, are they the same bushing or they're different?

Great video btw thumbs up

[CheluFromDaVille]

Could this be the problem with my 2009 Nissan Cube? When I let go the gas, mainly at slow speeds, I can feel and hear a knock behind the gas pedal. Just started happening sometime last year.

[tonycervantes]

Nice video bro...if is of all subframe what noise.o what. Problem.it.is.??

[pattypooh]

I have a 2010 Nissan cube Krom It sounds like my can has no juice between the joints. Would this part fit my vehicle?

[sukikuri]

AIR HAMMER ..SEEN.IT BUT NEVER KNEW IT WAS A AIR HAMMER.. LOL GREAT VID WITH SAFETY TIPS. THANKS

[leolau]

is that difficult to take down the whole subframe? how many screws are there?

[Hernsama]

Can you do this same technique with the front bushing or will it require you to remove the entire subframe?

[micmac]

Thanks for the video. It really helped me figure out my problem!