10KW Free Power Generator With Microwave Parts - Liberty Engine 3.0 - 100% REAL

10KW Free Power Generator With Microwave Parts 100% REAL

Operating principle:
By turning the small microwave motor we generate a 220v single-phase current that feeds the motor stator. In turn, the motor stator generates a rotating magnetic field that is transmitted through the metal bar to the coils of the microwave transformers. These coils generate 220vAC, and also have microwave magnets that help amplify the current flow. The two coils of the transformers are connected in parallel with each other and also in parallel with the motor stator and with the sockets, so that they continue to feed back into the circuit and we can use the excess current that is generated

Thanks for watching!!!

- You can also collaborate with our projects by purchasing a product from our store:
__________________

INDEX:
00:00 Intro
00:18 Electric motor characteristics
00:41 Checking the electric motor
02:37 Disassembling the electric motor
03:38 Modifying the microwave transformer
06:56 Machining parts
08:57 I turn Microwave motor into electric generator
09:43 Power Generator Assembly
13:56 Microwave Magnets
15:13 Tests
21:28 Acknowledgments

__________________

- To become a member of the channel, click on the following link:

We want to thank all the members of our channel, but especially the Elite members:
- arif yıldırım
- Brian Blackmore
- Gerald Conche
- Germán F
- Robert Martin
- Scott Fogarty
- Stephen Zorrilla
- Timur Kolesnikov

THANK YOU FOR YOUR SUPPORT!

_________________

Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.

_____________________________________

_____________________________________

HOW WE RECORD OUR VIDEOS

liberty engine,free energy generator,free energy generator with microwave transformer,10 kw free energy generator,100% REAL,free energy,energia libre,free energy generator magnet,free energy from microwave transformer,generador eléctrico,magnet free energy,magnet free energy generator,energia gratis con imanes,homemade free energy generator,how to make free energy generator,microwave transformer generator,magnets,amazing tech,tech,multi,new technology,free

[Владимир-мбл]

Самое сложное в этой конструкции, это спрятать питающий сетевой провод, с чем автор справился отлично!!!

[dikromeron]

Пока полной чистоты не будет, это лишь красивый фокус. Поднять всю установку в руки и включить мощную нагрузку и носить на руках на камеру со всех сторон.
Until there is complete cleanliness, this is just a beautiful trick. Lift the entire installation in your hands and turn on a powerful load and carry it on your hands to the camera from all sides.

[BatooBatoo-zz]

Когда смотрю такие видео то чисто для поржать, уверен что очень много электриков очень громко тоже ржут. 😀

[kartatay-ru]

Я таким генератором обеспечиваю всю Прибалтику электроэнергией. Завтра после обеда еще один генератор подключу и начну электроэнергию в Казахстан экспортировать.

[OgnjenKrejovic]

Svaka čast, sve pohvale. Apsolutna preporuka svim mladim da se okrenu ovakvim sadržajima umjesto farmi, velikom bratu i sličnim glupostima. Još jednom sve pohvale i pozdrav iz Sarajeva.

[toripo]

ФЕЙК КРАСИВО ИЗГОТОВЛЕН ! ШИКАРНАЯ МАСТЕРСКАЯ !

[tototiti]

If it works really he would win the Nobel prize 😂
And would win much more money with his own company than with YouTube rewards 😂

[maikeru]

По простому-Это то же самое, что жить, постоянно питаясь своим говном..Великий Дэвид Копперфильд "рыдает"...

[andand]

Whats amazed me is that so many people think this is genuine. Speechless ...

[ЮрийУрсу-ср]

Под столом у вас есть индукционная катушка, ведь по сути вы сделали вторичную катушку для приёма токов фуко то есть по сути это индукционная електро варочная панель, но видео было интересным видно что вы знаете дело, спасибо

[benwong]

This project should be tested in middle school laboratories to stimulate young people's brains.

[mikebeaulieu]

That's absolutely genius. The thing that's even more genius is that there are no moving parts.

[valerynicolenko]

Я поражаюсь всем этим видосам. Если умеешь и у тебя получается сделать изделие, то не для демонстрации, а для распространения сделай 2-3 экземпляра, для продажи. Кто купит и подтвердит эфективность, тогда в зачет. А так это видосики для пиар проекта фентези нью мен.

[RCzax]

Tesó!
Végre feltaláltad!👍
Kidobhatjuk azt a sok atomerőművet végre. Meg azt a sok kóklert is ki lehet rúgni aki a fúziós erőművekre költi a sok sok pénzt 🙃🙃🙃

Minden esetre gratulálok, hogy ennyi energiát fektettél ebbe az átverésbe !🧐

[protator]

So nice of you not to patent this technical marvel and make a fortune while solving the energy problems of the world.
I'm so touched, my tears are also 100% real. OMG LMAO.

[PhilippeVerdy]

the oscillating EM wave is not controled by anything. It just amplifies until it reaches some limit. You may experiment catestrophic result, if current goes too high, causing the wires in transformers and in the stator to melt and take fire, and possibly explode as there's also no temperature/current limiter, except the natural resistance of coper wires of transformers and stator; also without any control of the oscillating EM, I bet it is not stable, and the frequency is most probably growing. That system could then emit undesired EM all around, interfering with radio waves and causing perturbations, because there's also no screening at all to absorb the EM waves radiated on both open sides of the stator.

To suppress all these, an electronic device (using some power transistor and a small electric regulator) should stabilize the frequency and check that the "cos-phi" (angle between voltage and current) stays within the design limits of the stator (about 0.7 to 0.85 according to the plate). Otherwise that device may be dangerous.

May be if the EM oscillates too fast, the 2 transformers may start to vibrate: they are not firmly maintained, just sticked with a basic rubber. If the transformers move, they will interact negatively with the oscillating wave, and the system may stop working, for no longer being in correct phase. In the video, there's no vibration, but the video is short. That engine should also never be left without a charge to dissipate the excess of energy. And you should not leave the small microwave motor (0.75W) plugged in for long, it will not resist if it has to absorb high currents.

But I bet that the system cannot run for long, and the cos-phi will start varying (along with the frequency), and angular polarisations will have a negative effect on the inducted currents, causing the wave to turn off, and this is not easy to predict (depends on various noises, including temperature of the system)

A basic security should be to install fuses in the wires connecting the two transformers to phases of the stator, so that it can also stop the system. And you can turn off the system by inserting an On/Off switch on those wires (the alternative is to remove the magnets on both sides, but if the system becomes unstable, these magnets will be pushed away by the oscillating EM wave having the incorrect polarity. In the video this works only because of a specific length of the bar and position of the two transformers: the osillating EM ways is propagated along the central bar, which is thick enough to support high currents without melting (but this cannot be said about the thin helicoidal wires in the 2 transforrmers and in the stator).

The way the EM wave oscillates on the central bar (at specific wave lengths) is also dependant on the material with which it is built (it influences the speed of electrons), but also from the temperature and hygrometry of the air (where magnetic waves travel between the central bar and the stator). Try building it yourself, it may not work at all, unless there's a way to adjust the length of the bar or the horizontal position of transformers near both ends of the central bar.

So alone, this system canot be stable. Either the builder in the video was very lucky, or he did not film here the many attempts made to adjust the system, and did not show the effective measurements he made to make it work in a stable way long enough to take short video captures (reassembeld later).

[РашидТахмурадов]

Я вот почти все понял, вот только не понял как двигатель 0.75квт может на выходе дать 10квт. Наверно все дело в наклейках, главное их надо правильно наклеить.

[borisbeletskiy]

А еще был случай когда Мюнхаузен вытянул себя за волосы из болота...

[gkeith]

I’m really liking your compact direction😅

[이정열-jy]

Please reveal the specifications for the production
That'll make the viewers happy