How To Make a Wireless Charger

Показать описание

Hello Friends, in this video i will show you How To Make a Wireless Charger at Home in very easy way, I hope everyone like this video. Thank you for watching! Please LIKE, COMMENT and SUBSCRIBE for More Updates.

Things Required & Buy Link:

5V 1A DC Power supply AC Adaptor

Winding Wire - 32 Gauge

Music Credits:
youtube audio library

Please subscribe to our channel for more interesting videos :

OTHER VIDEOS OF CREATIVE LIFE :
=============================

Attention ! Be careful and do not repeat this at home, the author assumes no responsibility for your actions, this video is for entertainment, not education or a call to action!

#wireless #charger #DIY #Howto

Рекомендации по теме

Комментарии

No chance to work. The guy does not know the basics of Faraday's induction law. Alternating current is required in order to have induction. DC current from the power supply will only produce some heat to the primary coil after the transistor is burned. This circuit cannot even cook eggs

nickgliatis

i've just finish making the same, instead of 5 volt i'm using 12 volt, its working man..nice job

ramnunsangtea

I would recommend putting a rectifier diode on the receiver coil so it does not damage your battery. Other than that everything seemed good. Great video!

NoahKainWhittington

Stop hating on this guy atleast his yt is creative life and you dont need to put rude commets if you were true fans suport him then

Itz_Fritz

I want the last five minutes of my life back

robertpaverman

"And then you just glue this shit to your phone, trust me, I'm a doctor."

flame_half

DC Analysis of the circuit reveals that the 2N2222 NPN transistor's B-E (base-to-emitter) junction is forward biased and the voltage source is constant DC. Therefore, the transistor is always on. No change in magnetic flux = zero voltage in the secondary (the phone). The C-E current is constant because there are no circuit elements to force any voltage or current changes. The final result is that this gent made nothing more than an electromagnet - and a rather weak one at that. There is ABSOLUTELY ZERO change in the H-field (flux change = 0) and thus there is no induction effect. ZERO. People can say "Eureka!" all they want but this circuit would only make a great April 1 prank. By the way, the 2N2222 maximum, constant C-E current is less than 20ma. This circuit has no current limiting whatsoever and would "let the smoke out" of the transistor. Once the smoke gets out of resistors or transistors, they will not work again, ever.

BGLENN-dptx

Thanks you're wireless phone charger worked best

Cooking my phone.

ashokghugare

Dude the amount of wires used to make wireless charger 😂😂😂

zak_abass

The induced emf at the other end might be 5 Volt (to indicate charging status) but that would be alternating, there would be requirement of a full wave bridge rectifier to get it smooth as DC, and even so I don't think there would be enough current to pull the battery up, instead It will charge your battery down to 0%. It's a legit trial but not up to par.
People often get confused with Electromagnetic Induction (that is in dc developed by Michael Faraday) with the Resonant Inductive Coupling (that is used in ac as of lighting up bulb wireless and the one developed by Nikola Tesla) and is exactly the working principle behind wireless charger.

ronvoy

Well done New Idea. No one knows this type of idea

deshmukhanas

You can discredit this video right when you see he’s using a metal container to make the charger

joecriniti

Very nice video👍
Does it also work with the new Phones ?
How fast does it charge ?

marceldavis

Directions unclear, burned my house down 😕

trippyhndrxbeatz

Wouldn't recommend a metal container. Most metal types shield off induction. I mean it might work, but a plastic container would be much better. And it can also be a fire hazard, if you used a steel container the induction will cause the steel to become hot.

atomstarfireproductions