Linear Delta 3 DNR00001 DR DR3A Single Channel Gate or Garage Door Receiver

When you need to operate a security access point with a compact, easy-to-program device, the Linear Delta-3 DNR00001 DR DR3A single-channel gate or garage door receiver might be perfect for your needs. With a wire lead antenna and a mounting bracket, this ultra-small, 3-wire garage door receiver is easy to install and ready to go right out of the box. It's available in 12-volt and 24-volt models.

The Linear Delta-3 DNR00001 DR DR3A single-channel gate or garage door receiver activates one device, whether it's a security gate or a garage door, by operating on a 310MHz frequency. It measures just 5.5 inches across, 4 inches high and 1.25 inches wide, so it doesn't take up much room when properly mounted to a wall.
Comes with wire lead antenna and mounting bracket
Operates at 310MHz frequency
256 possible codes set by dip switches
Dimensions: 5.5 inches wide, 4 inches high and 1.25 inches wide

[armstlm]

Awesome video! Gave me exactly what I needed to program my new remote.

[garywithrow]

Is this the Box that stops your remote from opening and closing The one on the wall works fine

[lpmj]

Hello NS My Raynor door operator is at least 20 yrs old and it has the Delta 3 receiver. I get a clicking noise and the door will not open. Is it the Delta 3 malfunctioning? Thanks.

[thepoolguyabnation]

Can you hook up a smart garage opener to this type of controller? I purchased a GoControl GD00Z-4 and blew out the transformer upon connection (note the transformer that was in the garage was underrated and had been replaced before. I have replaced with an original 40Va) to terminal R1 to R2 like the online instructions show. I have a 12' RV bay door and the opener has a open/close/stop switch inside but works on standard opener delta-3 remotes. Any suggestions?