How to Install an Ultraviolet UV Water Filter

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

Great video but one issue. It is highly recommended to use copper pipe for the first 10”-16” of the inlet and outlet. UV light can weaken PEX and CPVC pipe.

skittleseer
Автор

Finally ! Someone that made a illustrative video thats comprehensible!

johngibbs
Автор

Shut off for bye pass ( on the left ) should be higher to prevent stagnation water from forming in the down pipe ! Nice Video… good ides to consider!

robertsimpson
Автор

Great video. Very informative and professional. Now it’s my turn to try the install.

geoffrobert
Автор

Is there any issue with placing PEX nearby the UV filter, since I've heard UV light degrades PEX? Thank you?

samkaplan
Автор

Seams like a bad idea to bypass the uv system when you change the bulb. This would let water that has not been disinfected to fill your hot water tank and the rest of your homes plumbing?

billrossey
Автор

Where is your pre filter and they don't recommend pex at lease 12" from the uv system. Also by-passes are not recommended.

elitewaterandair
Автор

I thought uv light deteriorates pex rapidly, and instructions state not to install pex in direct sunlight because of this. Isn't the UV light being emitted from the bulb equivalent to sunlight? Also don't the shark bites have a plastic collar inside them that will also deteriorate from the UV light? Not trying to take anything away from your install video just want to make sure before I go ahead and use this setup.

TONNAGE
Автор

So I assume the light works all the time. How hot does the water get, like say overnight when there is no flow?

ifish
Автор

If the bulb is always on it should be treating water ... gotta be a way to send water back thru a second or third time if the system is sitting idle at night or when not in use (ie everyone asleep or not home)

ChinamaxCLONESAWS
Автор

There is a error to use galvanize union because they are going to rust, coper union are the normal one to use

jOSEsANCHEZ-ngso
Автор

How mush is this system consuming electricity?

BARADAUSA
Автор

Does the units sync with house wifi to send you signal when there is trouble…

blt
Автор

Hello.I want to ask, is it possible to supply voltage to the lamp without water? Thank you.

alovsathuseynov
Автор

Great video thanks a lot for the insight.

israelvibration
Автор

Does the UV light damage the PEX pipes? is it preferable to do all the connections nearby using copper?

restagiu
Автор

A white lab coat on a guy who looks like he's been drinking all night is a nice touch! Just kidding, I'm rough looking too.

jacklaw
Автор

Do i install the uv system before my whole house water softener, or do i install after my 5 stage whole house reverse osmosis systems???

codyhamilton
Автор

How effective is the UV light, as far as flow rate? Also what kind of pressure can this unit handle, especially being installed on a well water supply. And is 3/4" line in/out ok?

avguru
Автор

thanks for the pointers! I think I won't use as many sharkbite fittings though, on account of not being a millionaire

quietfrog