Mastercam - Multiaxis Case Study: Machining pocket on a 4-AXIS MACHINE

Показать описание

THIS VIDEO WAS UPLOADED ON REQUEST

In this video I'll show you a way to machine pocket on a 4 axis machine. The following multi-axis toolpath types have been used:

- Parallel to surfaces toolpath: Roughing the pocket
- Swarf toolpath: Finishing pocket wall
- Curve toolpath: Make the chamfer toolpath

Рекомендации по теме

Комментарии

very nice and very clear tutorial..thanks for the knowledge

delacruzjeffrey

Great video again! Thx. Keep it that way :)

mariuszrodziewicz

Can you make a video creating a tool on an angle for a mill turn for drilling and tapping 10 deg? Not stationary 90 deg attachment, thank you

jomajoste

Chào anh Giang .
Anh cho em hỏi làm thế nào để khi mô phỏng mà chỉ trục A qoay được ạ.
cảm ơn anh.

tranquocchuong

Can you make a video on 5 axis on haas from a to z please to complete a part
Do you have time to train on 5 axis on haas?

vincentpham

Thank sir, if you give step file. It will be helpful to practise it.

giribabu

nice video tutorial, but i think this all operation is unnecessary.
why you dont use clasic operation pocket 2D, and on parameters select rotation..?
it works!

flovrec

How to made a geo pattern on cylinder surface in mastercam? It look like the demo pattern which has created in the video.

manchan

may i know how to open a pocket at cylinder use a axis using mastercam x9 2015
tq

ngsuelong

Anh ơi cho em hỏi em cũng làm thứ tự các bước giống như anh, cũng gia công ok nhưng mà chỉ có tool là nó di chuyển thôi, còn của anh thì phôi nó di chuyển quay quanh trục X vậy anh (4th axis) ? Em mò mãi mà vẫn không ra, mong anh reply giúp em với :(

ucchu

I have one question in mastercam 2023 programming

I have one job and create program through rotery advance then cycle time is around 100 min. Then run in machine and cycle time of machine is 300 min. Please help

prashantpachani

how do i make my cursor have a halo like that. mine gets lost alot in surfaces

shanmandude

that mouse click sound is annoying and stupid.

bawbaw

Mastercam - Multiaxis Case Study: Machining pocket on a 4-AXIS MACHINE

MASTERCAM MULTIAXIS CASE STUDY: SWAFT TOOLPATH (PART 1)

MASTERCAM MULTIAXIS CASE STUDY - 3D SLOT RAMPING

Mastercam Multiaxis Case Study: Knurling on the 5-axis

Mastercam Multiaxis case study: Chamfer holes that too close to part wall

MASTERCAM MULTIAXIS CASE STUDY: 4TH-AXIS TEXT ENGRAVING

Mastercam - Multiaxis Case Study: Machining pocket on a 4-AXIS MACHINE

MASTERCAM MULTIAXIS CASE STUDY: CUTTING RELIEF ANGLE ON A COUNTERBORE TOOL

MASTERCAM MULTIAXIS CASE STUDY: CUTTING FLUTES ON A SPIRAL TAP

MASTERCAM MULTI-AXIS CASE STUDY - PARALLEL CUTS

Start to Finish Complex Machining Project | Mastercam Multi-Product Case Study

Mastercam multiaxis case study: Roughing a screw shaft using slot cutter

Mastercam multiaxis case study: Tilting tool with 'Fixed angle to axis' option

Mastercam Multiaxis Case Study: Knurling with Project Curve Toolpath

MASTERCAM MULTIAXIS : QUICK AND SIMPLE WAY TO CREATE A MULTIAXIS TOOLPATH

5 Axis Simultaneous Cnc Machining Using The Multiaxis Morph Toolpath In Mastercam

Mastercam Multiaxis Case Study: Morph between 2 Curves Toolpath

Mastercam Multiaxis first Case

MASTERCAM CASE STUDY: CUTTING TEXTURE ON A CUSTOM KNIFE GRIP

ROUGHING for Mastercam multiaxis

MASTERCAM CASE STUDY: FEEDRATE OPTIMIZING WITH HIGHFEED FUNCTION

A case study between 3 axis and 5 (3+2) axis technology - What is the best fit for you?

MASTERCAM MULTIAXIS TUTORIAL: MULTI-AXIS INDEXING USING T-PLANE TRANSFORM

MASTERCAM CASE STUDY: TOOLPATH TRIMMING

Mastercam Multiaxis Tutorial: Port Expert Toolpath