The Charlie Show /// Episode 336 /// Calibration Trouble Shooting

preview_player
Показать описание
Calibration of the electronic speed control, is often a topic that gets overlooked or may give us some troubles. This video covers the basics of calibration, as well as some trouble shooting to review if there are problems. The Servo Test is a quick and simple way to get some visual confirmations.

HOBBYWING Official Youtube

+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)

+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)

Our mission: Help create memorable moments worldwide.

Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB
Рекомендации по теме
Комментарии
Автор

Thank you so much man this helped me calibrate my Hobbywing SE motor easily!!!

RuckusHuckusYT
Автор

A very usefull tutorial, thks for the Info Share!
Just have up-grade the Wife RGT whit one Fusion Pro 1800kv and is Awesome, transforn the truck totally!!!

pandacrawlerx
Автор

Hello. Friends! I have a question, can I take my hw fusion se 1200kv apart by removing the screws on the housing to replace the bearings if they break?

ilesk
Автор

Okay so I have a question as I use two of there’s motors on an MOA bully 2 with a radio link remote. When crawling sometimes my rear motor will lock up and it will move super fast and then just drag like it almost jolts forward when I’m in a slow crawl and then will lock up the rear motor would recalibrating them fix this?

dougchesney
Автор

Question for you regarding fusion 1800 se. Motor was not running smoothly anymore so tried calibration by having motor removed from crawler, disconnected from esc, connected to battery and hold for 8 seconds till it flashes green. Normally goes through cycle etc and then turn off. Mine starts the shaft spinning after flashing green for about 5-7 seconds then stops, jerks then just starts rapidly flashing red and nothing else. Whats the problem?

DaddyDaughterRC-swzb
Автор

I have a question. Accidentally hooked battery backwards on xr10 pro. Poped capacitor. Replaced and works fine. But doesn't seem to have full throttle. Is that fixable or trash it?

wadedavis
Автор

Unfortunately my calibration goes green once and then doesn’t do the forward or backwards calibration. Any advice?

LJSCOFIELD
Автор

Hi guys, love your channel, can you help, just watched your 336 episode, as my 10bl60 is playing up, for some reason I couldn't get the throttle (transmitter gt3c) to work, when I turn it on solid red led comes on then goes off, when I try to calibrate it after I turn it on while holding the set button until red led starts flashing and beeping the motor keeps moving/rocking very slightly (1 tooth) no green led I press the set button while in neutral the red led goes off as does the beep and motor stops moving, also tried your servo trick taking esc out of channel 2 and replacing it with the servo I still get nothing, can you help, Kind regards. Jason

swadewatts
Автор

I guess I'll pull my "bad" Fusion se off my shelf and try again.

coolinthewoods
Автор

Need Help : I Need a E SCOOTER ESC 9037.. and I have emailed every person I can find still no help I need a dual motor speed control...this is the Page to help someone help me with a link to buy..

hardworker