How to Use Cobra's MyFly 8 Adjustable Hosel

#Cobra had incredible success in 2019 with its F9 Speedback lineup, and it is already generating plenty of buzz for 2020 having announced that the new #SpeedZone family of golf clubs is on the way. One reason why Cobra’s drivers, fairway woods, and hybrids have been so successful is the customization options that they provide players through use of the #MyFly 8 Adjustable #Hosel. In this video, 2nd Swing master fitter Thomas Campbell discusses the eight different settings available with Cobra’s MyFly 8 Adjustable Hosel and how they can help you dial in the performance that you’re looking for.

[beatzzz]

I just did this with my ping G410. It's already a low spinning club so I increased the loft to the max and put the weight in the draw setting. Ball flight going much straighter instantly. Thanks for the tip 👍🏼

[vitapharmnutrition]

I have a right hand cobra adaptor on my left hand speedzone head. If i want to lower the loft with -1.5, should i actually set the hozzle to +1.5 because it is a right hand adaptor?

[becrisp]

The draw setting changes lie by ??? Degrees? Same Q to the loft increase/ decrease - how many deg open/ closed is the face? I have not seen a chart like Taylormade publishes about the hosel adjustments

[thomashill]

You wouldn’t believe how hard it is to find a nice and simple explanation like this! Thank you so much 🙌🏼

[mmalifestyle]

Is there a click you're supposed to hear when tightening the screw?

[donaldbattle]

Thank you nice And simple! This is all we're asking for

[ronnieprater]

So the grip, when adjusting the hosel, turns my grip all the way under, so do i not pay attention to the grip, and just grip the shaft where the head is laying correct?

[alanwilson]

The problem with Cobra, TM, and a few other companies methods of adjustability the shaft and grip rotates. Callaway’s version is much better as the shaft position doesn’t change so you don’t need to regrip your club

[didierlegall]

At last a vidéo that answer my question 👊🏻👊🏻👊🏻

[danthemanwhocancan]

Nicely presented. Any chance you can do an advanced user edition where you use a left hand adapter in a right hand head? I bought and sold both an F7 fairway and F8+ fairway purely because to my eye it sat with a closed face. I don't want a 13.5 degree lofted 3 wood it's too unfriendly to use but this it what I am left with when I square to open the face with a RH adaptor. I want the adaptor installed in the correct setting for me and then have the shaft and grip installed straight. With the Callaway adaptor the shaft graphics and grip logo remain in place (underside) whereas with the Cobra the shaft graphics are annoyingly skee whiff on a distracting angle to the Player (me)

[reece]

I'm a beginner and I have the 9 degrees driver With plus 1.5 on the myfly so it's 10.5 Does that seem ok for me ?.

[michaelrood]

How do these adjustments affect lie angle?

[tenniyoe]

What would be the best setting as a left handed golfer, I usually slice the ball to the left!

[nomoreusernamesavail]

I have the earlier Ampcell using the myfly . Can i use a shaft with the myfly8 with the ampcell

[Ajbeckett]

How much degree uplift does the draw bias setting add?

[Godisnotjesus]

Hi. I have a Cobra driver. My Q is the lowest loft/degree adaptors can be set to.
Believe me!....I need a 5° loft. Yes five degrees. Lets not argue. Bryson de C use a custom built by Cobra.
If you didnt late Calvin Pete who held driving accuracy nr.1 spot for 10yrs used a 4degree driver.
I naturally hitball high. So I loose a lot of distance as result.
Higher equals
Lower is staighter!

[eckathewrecka]

What F9 setting would you recommend for a senior player, as in weights and club head, I'm 68.

[simonjones]

Hi There, How would this work for a left handed club? I have been advised to adjust my 9 degree driver to 10.5 degree draw setting - what setting do I need? Any advice is much appreciated

[RISKSPELMAN]

Wy dont you talk about the settings under the clubhead??

[creamabdul-jabbar]

Does the cobra f9 not come with the tool to adjust it? I just bought this and it didn’t have a tool