Reset System Manager ID Canon imageCLASS mf445dw

Показать описание

Reset System Manager ID Canon imageCLASS mf445dw to eliminate annoying login screen
when ID and password lost or forgotten.

Рекомендации по теме

Комментарии

May 7, 2024 supplement in case original instructions in video fail for
a different or same Canon laser printer:

Resetting the System Manager ID on a Canon imageCLASS MF445dw involves accessing the service menu. Here are the general steps:

1. Turn off the printer.
2. Press and hold the "Menu" button while turning the printer back on.
3. Keep holding the "Menu" button until "Service Mode" appears on the screen.
4. Press the "<" or ">" buttons to navigate to "COPIER, " then press the "OK" button.
5. Navigate to "FUNCTION, " then press the "OK" button.
6. Navigate to "CLEAR, " then press the "OK" button.
7. Navigate to "P-W" (Password), then press the "OK" button.
8. Enter "6789" as the default password, then press the "OK" button.
9. Navigate to "ALL, " then press the "OK" button to reset all settings, including the System Manager ID.

Please note that accessing the service menu and making changes to settings can affect the printer's functionality. Ensure you have the necessary knowledge and permission before proceeding. If unsure, it's best to consult with a qualified technician or Canon support.

mikeflores

The only solution that worked for MF463dw. Thank you so much!😃

DBKL-cy

HUGE THANK YOU for posting this video. I've been trying to fix this Canon mf445dw printer for months, but could not access or factory reset. Today I was successful. Thanks again!

jeffreyspino

I've been searching for ages how to reset the System ID for my printer. I've got a MF645Cx and this worked for me. THANK YOU

jtproductions

I've got a MF645Cx and this worked for me. THANK YOU😀

Jihyeonable

Thank you! Thank you! Thank you!!!! This worked on my MF654cdw

daisyjaneisntplain

Thank you so much! No one was able to help me, but you 😊
You are Good man!

ingridvicente

Works perfectly for MF645cx - thank you!!

dharrington

Fixed my Imageclass MF455dw THANK YOU THANK YOU

edb

Thank you so much. You helped me and saved me $ because I was going to buy a new one

RSrealll

thank you so much for this. just what i needed.

GodsNotDead

This doesn't work for my printer at all. The button on the side invokes a volume setting screen and pushing the red button 5 times invokes a screen that shows certain features disabled and the only option have then is to "resume".

epeoples

Didn’t work for me. I have an MF450. After pushing side button all I got was an invalid beep when pushing the stop red button 5 times. No menu showed up on screen either.

Pfps