Cisco IOS XR Replace Interface/Pattern command with useful examples

Показать описание

Hello!
In this video you will learn what this replace interface/patter command does and its power to make you save a lot of time when implementing.

These are the full commands used in the examples:

configure terminal
replace interface gigabitEthernet 0/0/0/7 with loopback 99 |dry-run|
replace pattern '10\.20\.30\.40' with '100.200.250.225' |dry-run|
replace pattern 'GigabitEthernet0/0/0/([1-3])' with 'TenGigE0/0/0/1\1' |dry-run|
commit

#cisco #networking #cisco_routers #commit #replace #regex #interface #pattern #useful #cisco_IOS_XR #configure_terminal

Krakit

Рекомендации по теме

Комментарии

Very informative. Please also do a quick one on
“no interface gi “ command showing how it removes that interface from protocols that interface was attached to in ios-xr . Thanks

fawadahmad

Cisco IOS XR Replace Interface/Pattern command with useful examples

Cisco IOS XR Replace Interface/Pattern command with useful examples

IOS XR Introduction :: vSeminar

Python Script to Monitor Cisco Interface and trigger Email if status changes: Logging and RegEx Demo

REGEX in Cisco Expressway

Dell Networking C-Series: Installing line cards

ISP/IIG SETUP using CISCO (IOS-XR) - Class 03 - [Basic Configuration and OSPF]

Cisco EVPN

How to configure EEM Script Part 2 Troubleshooting || GNS3 Labs || Dinesh Kumar

DevNet Create 2021 - Building a troubleshooting assistant

Cisco NSO Service Modeling Lab

ENOG 15: Netconf/YANG tutorial: Evgeny Zobnitsev (EN)

Cisco CCIE RS Mentorship Program Introduction

Using OpenDaylight

JUNOS Lap 2 Configuration Basics Eng.Haitham Elkot

Unix and Shell Programming Chapter 11 SED PART 2

NANOG 77 Day 2

How to Introduce Telemetry Streaming (gNMI) in Your Network With SNMP With Telegraf | DZone Webinar